Advertisement
This advanced massager is designed to squeeze away the stress and tension of everyday life, offering you a powerful and unparalleled massage experience. Your satisfaction is our top priority, and we are here to assist you with any questions or concerns.
We are a small American family business in California rooted in the core value of enhancing our customers' lives. Our dedicated team strives daily to create thoughtful, high-quality products, giving you confidence in your purchase. After all, our products are crafted with care for those who matter most: OUR FAMILY & FRIENDS!
This manual contains instructions on how to operate and maintain your model so that you can enjoy it for years. However, please be advised that mishaps could happen in time. Rest assured that LUNIX is a team of professionals committed to providing the highest factory support possible.
We know you're excited about using your LX3 Hand Massager, but you must take some time to read through the User Manual. This manual contains all the necessary setup and operating procedures that will allow you to use your new device. Also, read and follow the precautions and warnings in this manual and any labels or tags attached to your model. They are there to educate you on how to operate your unit safely and also get maximum life and performance from it.
Thank you again for choosing LUNIX. We work hard every day to ensure the highest level of customer satisfaction possible. We genuinely want you to enjoy your new LX3 Hand Massager!
You can find more information on our website at www.lunixinc.com ;
If you have any questions about your model or its operation, contact LUNIX Customer Support by email:
support@lunixinc.com
PRODUCT NAME: Hand Massager
MODEL: LX3
POWER: 5W
WEIGHT: 2.5 lbs / 1.1kg
VOLTAGE: DC 3.7V
BATTERY: Lithium
DIMENSION: 11.8 x 6.3 x 4.7 in / 30 x 16 x 12 cm
This product is surrendered by LUNIX to the purchaser with the understanding that the purchaser accepts the responsibility that using the LX3 Hand Massager with its accessories in a careless, improper, or unsafe manner can result in serious injury or death. Also, the purchaser assumes all liability resulting from misuse, unsafe handling, failure to follow instructions, or any action violating applicable laws or regulations. LUNIX shall not be liable for personal injury, property loss, or life resulting from using this product under any circumstances, including intentional, reckless, negligent, or accidental behavior. LUNIX shall also not be liable for any special, indirect, incidental, or consequential damages arising from the assembly, installation, or use of this product or any accessory or chemical required to use this product. By the act of operating & using the product, the user accepts all resulting liability and releases LUNIX of any and all liability associated with its use.
If you, as the user, do not accept liability for Usership, LUNIX requests that you do not use this product. Do not open any of the enclosed materials. Return the model to LUNIX, but please be advised that we absolutely cannot accept an item for return or exchange after it has been used or is otherwise no longer in as-new condition.
All information in this User Manual is subject to change without notice. For the most updated version, please visit our website.
LUNIX reserves the right to make changes and improvements to products without incurring any obligation to incorporate such improvements into products previously sold. If you have any questions about your model or its operation, contact Customer Support by E-mail: support@lunixinc.com
The Lunix LX3 Hand Compression Massager is designed to provide a comfortable massage based on human engineering and acupuncture point distribution. Unlike other massagers, it uses Lunix's compression technology instead of the rolling function, resulting in a massage that feels like having a professional masseur-physiotherapist at home.
Regular use of the LX3 Hand Massager can help relieve hand pain, improve blood circulation, reduce inflammation, and ease muscle tension. It is especially beneficial for those suffering from arthritis, carpal tunnel syndrome, or general hand fatigue. The massager can improve overall well-being by promoting relaxation and reducing stress.
To experience the benefits of the massage, it is recommended to use the LX3 Hand Massager for 10 to 15 minutes, one or two sessions daily, for at least seven consecutive days. While some users may feel relief right away, results can vary from person to person, depending on individual needs and conditions. It's essential to start with a lower intensity and gradually increase it as the body becomes accustomed to the massage. Your safety is our priority, so please consult your doctor immediately if you feel unwell after use.
Sit back, relax, and enjoy a good hand massage after a long day of work or before going to bed.
We want you to enjoy your new hand massager safely. Operate your model sensibly and carefully to ensure an exciting, safe, and relaxing experience. Failure to use the device safely and responsibly may result in property damage or serious injury. It is crucial that you strictly follow the precautions outlined in this manual to help ensure safe operation. Remember, you are solely responsible for adhering to these instructions and precautions.
SAFETY WARNING:
Check Health Guidelines
Usage Restrictions
General Safety Guidelines
BATTERY SAFETY GUIDELINES
RISK OF INJURY!
We strongly recommend that people who have very sensitive hands use the lowest intensity.
FIRE HAZARD!
CHARGING OR DISCHARGING BATTERIES POSES A NUMBER OF SIGNIFICANT HAZARDS WHICH CAN INCREASE THE RISK OF FIRE, EXPLOSION, SERIOUS INJURY, AND PROPERTY DAMAGE IF NOT PERFORMED AS PER THE INSTRUCTIONS.
BEFORE USE, READ AND FOLLOW ALL MANUFACTURER'S INSTRUCTIONS, WARNINGS AND PRECAUTIONS.
NEVER ALLOW CHILDREN UNDER THE AGE OF 14 TO USE THE MASSAGER WITHOUT THE SUPERVISION OF A RESPONSIBLE, KNOWLEDGEABLE ADULT. THIS PRODUCT IS NOT A TOY.
PLEASE WASH YOUR HANDS EACH TIME BEFORE USING THE HAND MASSAGER
The LX3 Hand Massager is a personal care product. It is not intended to treat, diagnose, or cure any medical condition. Always consult with a healthcare professional if you have concerns regarding your health.
Charge the hand massager before first use. It's crucial to only use the USB cable and plug included in the package to charge the unit. This ensures the safety and optimal performance of your hand massager. Using a different plug or a charger with specifications higher than 5V/2A can affect performance and damage the unit.
The battery level indicator should blink green while charging, indicating that the hand massager is receiving power. Once fully charged, it should display four solid green lights, signaling that the hand massager is ready for use.
For maximum battery capacity and optimal performance, charge the hand massager for 7 hours before first use. Please note that the device does not turn on while charging and cannot be used until fully unplugged for safety reasons. If the green light is not flashing while charging, refer to the troubleshooting section of this manual.
How to Use the Hand Massager
POWER BUTTON
POWER ON: Press the power button for 2 seconds to turn on the massager. Then, press the program button to start the massage.
POWER OFF: The massager's default run time is 15 minutes, and it automatically shuts off after the massage session. To turn it off manually, press the power button for 2 seconds. The airbags will slowly deflate once the device is shut down.
You can start again if you want to go for a second session.
INTENSITY BUTTON
The default intensity is level 3, with 6 levels ranging from 1 (weakest) to 6 (strongest). Adjust the intensity by pressing the button.
If your hands are sensitive, start at level 1 and gradually increase as your hand gets accustomed to the massage. Use regularly for a few days to experience pain relief and full massage benefits.
PROGRAM MODE
The massager starts in program mode P1. It has 6 massage modes to choose from (P1 to P6).
Each mode targets different areas of your hand. Choose your preferred mode by pressing the program button. Everyone may feel a unique massage due to different hand shapes.
Combination between Fingers, Palm and Wrist Massage | P1 |
Combination between Fingers, Palm and Wrist Massage | P2 |
1st cycle Palm Massage 2nd cycle: Palm and Wrist Massage | P3 |
Wrist massage | P4 |
1st cycle Palm Massage 2nd cycle Wrist Massage | P5 |
Palm Massage | P6 |
VIBRATION BUTTON
Press the button to activate the vibration mode. When the option is activated, the red light above the button will turn on.
The LX3 hand massager provides 2 different vibration modes: pulse and continuous. Press the button several times to switch between the modes.
HEAT BUTTON
Press the button to turn the heat ON or OFF. When on, a red light appears above the button.
Please note that the heat function increases gradually, and as your body gets accustomed to the heat, it may not feel very intense. However, the temperature does reach its optimal level of approximately 104°F (40°C) after 5 to 10 minutes of use. This gentle warmth is designed to relax and enhance the massage benefits. Wearing gloves can help intensify the sensation and aid blood circulation if you want to feel more heat.
This Finger Massager is an easy and relaxing way to soothe tired fingers after a long day. Just put your finger in the middle of the roller and scroll back and forth to enjoy a wonderfully comfortable massage.
When operational problems occur, please refer to the chart below.
PROBLEM | POSSIBLE CAUSE | SOLUTION |
I am unable to start the unit | The unit did not start properly OR battery is low | Press the Power Button for 2sec OR recharge the unit |
The massage pressure is too low | Battery is low OR intensity level is too low | Recharge the unit OR increase intensity level |
The massage pressure is too strong | You are using an Intensity level that is too high OR your hands are not correctly positioned inside the unit | Use I1 Intensity OR try to adjust your hand in the unit to feel comfortable |
My unit suddenly stopped working | Power outage OR massage more than 15min OR long working time, the unit has been shut off due to overheating protection | The unit automatically shuts off after 15min of use. Use the unit after the motor has been naturally cooled |
I hear a faint sound while using the massager | The air pump is working | Normal behavior |
I have dimples on the hand after the massage | Comes from the airbags cover | Normal behaviour, it disappears after 30min |
The airbags are not inflating | Battery is low | Recharge the unit. If the problem persists, please contact us at support@lunixinc.com |
I can not see the green light flashing while charging OR the unit turns on for a few seconds, then all the lights flash and the unit powers down | The unit is not charging properly because the connection is not made properly between the usb port and usb cable OR the plug is higher than 5V 2A | The usb cable needs to fit entirely into the the USB port OR the plug must not exceed 5V 2A |
How do I know when the unit is fully charged? | Once the unit is fully charged, the battery level indicator should have 4 solid green lights | |
Unit stopped charging | Unit not receiving the correct amount of voltage | Make sure the charger you used is 5V 2A and the charger (plug or laptop) must not exceed 5V |
Air pump not working on the wrist area | Wrong program selected OR air pump is defective | Try the wrist program and if still does not work contact us at support@lunixinc.com |
The display is constantly turning on and off making a beeping noise | PCB problem | Contact us at support@lunixinc.com for further assistance |
The vibration function is not working | Unit not fully charged | Make sure the massager is fully charged and if the problem persists contact us at support@lunixinc.com |
Heat function not working | Unit not fully charged and the heat option takes some time to achieve the highest temperature | Wait at least 10-12min before feeling the heat and you can also wear a regular pair of thin gloves; thus, you can increase the heat- feeling |
Unit changing intensity programs | PCB defective | Contact us at support@lunixinc.com for further assistance |
Unit is hot | Excessive use | Power off the unit and let it cool before further use |
If you have any questions, concerns or if you would like to order any spare parts or replacements. Please contact us at support@lunixinc.com and we will get back to you within 24 hours
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the LX3 and is the answer not in the manual?
Questions and answers