Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Yokota 8717981009022
Summary of Contents for Yokota 8717981009022
- Page 1 YX-4500 Manual www.rami-yokota.com...
- Page 4 UNSPSC number 27131501 Eclass number 21061206 8717981009022 Before taking into use Read and understand the contents of this manual before installing, operating, repairing, maintaining, changing accessories of this tool. Only qualified and trained operators should install, adjust or use the tool.
- Page 5 If you intend not to use the tool for a longer period of time, it has to be oiled. Please fill some droplets of resin and acid free oil into the air inlet and let the tool run free for a couple of seconds. This Tool is suitable for "oil free"usage, this means that the compressed air does not need to have an oil lubrication.
- Page 6 Wear the appropriate clothing to feel comfortable at the workplace. Cold exhaust air should be diverted from hands and body. Air under pressure can cause injuries, be aware of this. Never direct the exhaust air to yourself or anyone else. Do not use quick change couplings direct on the air inlet of the tool as these may release during operation.
- Page 7 Make sure that the inserted/mounted tool/accessory is properly held by the retainer and make sure that the retainer is in good condition. Never use the tool without a retainer as this may cause high speed projectiles. Only use impact rated sockets when using impact or impulse wrenches. Using the tool: Before start using the tool, make sure that you are familiar with the workplace and surrounding area.
- Page 8 Oil replacement should only be carried out by trained qualified specialists. For Yokota Impulse wrenches the advice is to replace the oil after 250.000 cycles on hard joint, one cycle is 0,5 – 1 second impulsing. On soft joints, longer impulsing time per cycle, the oil must be changed earlier.
- Page 9 Warranty covers material or construction mistakes of the manufacturer, which are clearly definable. Replacement of parts or repair by an official Yokota/Red Rooster service workshop is free of charge, when the tool is covered by warranty. Freight or postage is for the account of the buyer. Damage attributable to a normal wear, overloading or incorrect use is excluded from warranty.
- Page 10 www.rami-yokota.com...
Need help?
Do you have a question about the 8717981009022 and is the answer not in the manual?
Questions and answers