Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instruction
manual
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when assembling or
using this cabinet.
Locate cabinet in a suitable work area when assembling it.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Keep the racking unit clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the assembly area.
9
It is recommended that two competent people are involved in assembling these units.
9
Consult vehicle manufacturers hand book / guide book for fixing recommendation in the vehicle.
9
Load heavier items low down in the unit.
9
DO NOT use the racking unit for any purpose other than that for which they are designed.
8
DO NOT clean the racking unit with any solvents which may damage the surfaces or the protective coating.
8
DO NOT move the racking unit when there are items placed inside.
8
DO NOT overload the cabinet.
8
2. INTRODUCTION
25kg capacity per level giving a maximum capacity of 75kg per rack. Lightweight weighing (4kg APPR3) (100kg APPR4)
(125kg APPR5) making manoeuvrability easy. Boltless design ensures simple assembly. Slots together in minutes.
3. SPECIFICATION
Model No
Capacity
Nett Weight
Overall Size (W x D x H)
Shelf Capacity
Model No
Capacity
Nett Weigh
Overall Size (W x D x H)
Shelf Capacity
4. CABINET ASSEMBLY
4.1.
Assemble as per parts list. Use a trestle table or a workbench if required.
© Jack Sealey Limited
PLASTIC RACKING UNIT WITH 3 SHELVES 25KG
CAPACITY PER LEVEL
MODEL NO:
APPR3
75kg
4.0kg
610 x 310 x 900mm
25kg
APPR5
125kg
5.0kg
610 x 310 x 1300mm
25kg
Original Language Version
APPR3 APPR4 APPR5
Model No
APPR4
Capacity
100kg
Nett Weigh
5.0kg
Overall Size (W x D x H)
610 x 310 x 1300mm
Shelf Capacity
25kg
APPR3 APPR4 APPR5 Issue 1 21/01/25
Need help?
Do you have a question about the APPR3 and is the answer not in the manual?
Questions and answers