Subscribe to Our Youtube Channel
Related Manuals for Sengled E1M-G7H
Summary of Contents for Sengled E1M-G7H
- Page 1 Sengled Smart Indoor Motion Sensor Model: E1M-G7H USER GUIDE...
-
Page 2: Important Safety Information
Introduction: The Sengled Smart Indoor Motion Sensor enables you to know when a motion is detected. With our 3rd-party integration, you can use the sensor as a trigger to other smart devices in your home. Note: A hub is required to control the sensor. -
Page 3: Installation Instructions
Installation Instructions: To add your Smart Sensor to a Sengled hub, follow the instructions below. If you DO NOT have a Sengled Smart Hub and Sengled Home app previously installed, please install your hub according to its user guide in the package before installing the sensor. - Page 4 B3. Follow the arrow on the fixing cover of the connector, then rotate it to the base. B4. Adjust the sensor to your desired angle and now your sensor is ready to go！ C. Or mount the sensor on the wall (with 3M sticker).
-
Page 5: Change The Battery
It can also function as a trigger, such as turning on your lights and speakers when a motion is detected. Find more fun in your Sengled Home app. Note: By adjusting the height and angle of the sensor, you can decide your sensor to be whether pet immune or pet sensitive. -
Page 6: Frequently Asked Questions
1. How can the Smart Motion Sensor be connected to the network if it looks o line? Make sure your hub is online in the Sengled Home app by pulling down the home page to refresh the device status. Stand in the detection range of the sensor will trigger a status update. -
Page 7: Product Specifications
120°Horizontal, 90°vertical Dimensions 62 mm(2.44’’) x60 mm(2.36’’) x35 mm(1.38’’) Limited Warranty: 2-year limited warranty from original purchase date. To learn more about the Limited Warranty for Sengled products, please visit www.sengled.com/warranty. For FCC and IC Statement details, refer to www.sengled.com/fcc. Support: If you encounter any issues, please reach out to your local Sengled Support team. - Page 8 The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter and must be installed to provide a separation distance of at least 20cm from all persons. For details, reference www.sengled.com/fcc.
- Page 9 Canada Regulations: This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présentappareilestconforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
- Page 10 fonctionnant en meme temps quaucune autre antenneou emetteur. Cet equipement devrait etre installe et actionne avec une distance minimurn de 20centimetres entre le radiateur et votre corps.
Need help?
Do you have a question about the E1M-G7H and is the answer not in the manual?
Questions and answers