teenage engineering TP-7 User Manual

TP–7
field
tape
recoder
warnings and important notes
before connecting this unit to other devices, turn off the
power to all units. this will help prevent malfunctions
and/or damage to speakers or other devices. if you
need to connect/disconnect wires during use, always
make sure to connect the cable to the TP–7 first.
never connect the 3.5 mm plug going from the TP–7's
inputs or outputs to a microphone input with active
phantom power. this could damage the TP–7.
be sure to charge the unit using only 5V usb power,
such as that from the usb ports of a computer, or by
using a dedicated usb charger.
make sure to read the regulatory statements here
what's in the box
TP–7 unit
user guide
notice. read this first.
make sure you always have the TP–7 placed so it is level
and sure to remain stable.
use your TP–7 where the ambient temperature is
between 0 °C and 50 °C (32 °F and 122 °F) and the
relative humidity is lower than 95 %. never install or use
the unit in any of the following locations:
• humid environments or baths and washrooms.
• safety-critical applications.
• nuclear facilities and weapons systems.
• aerospace applications or environments for
automotive installations
user's guide
ガイド
caution
risk of explosion or fire if the battery is replaced with
incorrect type or the unit is perforated.
do not try to charge or use a unit with a seemingly
damaged battery.
only a battery supplied by teenage engineering and
installed by qualified personnel should be used.
disposal of a battery into fire or a hot oven, or
mechanically crushing or cutting of a battery, can result
in an explosion.
leaving a battery in an extremely high temperature
surrounding environment can result in an explosion or
the leakage of flammable liquid or gas.
to prevent possible hearing damage, do not listen at
high sound levels for long periods.
store small parts out of the reach of children and infants.
if accidentally swallowed, contact an emergency
medicine doctor immediately.
6.3 mm adapter
download as PDF
warranty and return policy
the TP–7 is fully factory tested and comes with a 12
month (from purchase date) warranty. this does not
include malfunction due to misuse of the device, such
as being dropped, crushed or used in an application of
inappropriate voltages to the device's connectors or
improperly designed or executed modifications.
in particular, you are the sole responsible for damage
caused by a charging method other than 5V usb power.
the warranty does not cover shipping charges. make
sure to read the terms and conditions here.
check that the following items are
included when you open the box
usb-c cable
V.1.0.0