Advertisement
Quick Links
EN
ELECTRIC HEATER WITH
CARBON FIBER HEATING ELEMENTS
OPERATING INSTRUCTIONS
Read the instructions carefully before installing and operating the appliance or performing
maintenance operations. Observe all the safety instructions; failure to observe the instructions may
cause accidents and/or damages. Store these instructions for future reference.
This product is only suitable for well insulated spaces or
occasional use.
V 05/25
10
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Argo AMBIENT
Summary of Contents for Argo AMBIENT
- Page 1 ELECTRIC HEATER WITH CARBON FIBER HEATING ELEMENTS OPERATING INSTRUCTIONS Read the instructions carefully before installing and operating the appliance or performing maintenance operations. Observe all the safety instructions; failure to observe the instructions may cause accidents and/or damages. Store these instructions for future reference. This product is only suitable for well insulated spaces or occasional use.
-
Page 2: General Safety Information
GENERAL SAFETY INFORMATION • Use this carbon fiber heater only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to people. • Ensure that the mains power complies with the voltage specified on the carbon fiber heater data plate (220-240V~/50Hz). - Page 3 covered or incorrectly positioned. Do not restrict the air inlet and outlet grilles. • The appliance heats up slightly when in use. In order to avoid burns, do not let bare skin touch hot surfaces. • Ensure that all objects are at least 1 meter from the front and sides of the appliance.
- Page 4 and cleaning the air outlets and grilles with the aid of a vacuum cleaner. • Do not use abrasive detergents for cleaning this appliance. Clean the appliance with the aid of a damp (not wet) cloth rinsed in hot soapy water. Always remove the plug from the mains socket before cleaning.
- Page 5 • Do not operate the carbon fiber heater in close proximity to bathtubs, showers, washbasins or pools. • Do use the appliance in the bathroom. • The heating appliance must not be positioned immediately below a power outlet. • Do not operate the appliance outdoors. •...
-
Page 6: Description Of Parts
DESCRIPTION OF PARTS 1. On/off selection knob 6. Anti tip device 2. Swing button 7. Fixing screws 3. Carbon fiber heating elements 8. Fairlead 4. Handle 9. Cable reel Base HOW TO USE THE CARBON FIBER HEATER Connect the power cord to a suitable electric socket (220-240V~/50Hz). Place the On/off and selection knob in the desired position: ECO (500 W) or COMFORT (1000 W). -
Page 7: Maintenance And Storage
OVERHEATING SAFETY DEVICE In case of overheating the safety cut out protecting the heating element will automatically switch off the appliance. In this case the appliance stops working. If this happens: • switch off the heater; • remove the causes of abnormal operation or overheating (i.e. obstacles in front of air inlet or air outlet grille, abnormal accumulations of dusts inside the appliance);... - Page 8 REGULATION (EU) 2024/1103 of 18 April 2024 implementing Directive 2009/125/EC of the European Parliament and of the Council as regards ecodesign requirements for local space heaters and separate related controls and repealing Commission Regulation (EU) 2015/1188 Model identifier(s): ARGO AMBIENT Item Symbol...
- Page 9 INFORMATION ON THE CORRECT DISPOSAL OF THE PRODUCT pursuant to Art. 26 of (Italian) Legislative Decree no. 49 of 14/03/14, “IMPLEMENTATION OF DIRECTIVE 2012/19/EU ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT” At the end of its useful life, this appliance must not be disposed of together with household waste. We call your attention to the crucial role played by the consumer in the reuse, recycling and other forms of recovery of such waste.
Need help?
Do you have a question about the AMBIENT and is the answer not in the manual?
Questions and answers