How to Clean
1
Load the cleaning cartridge into the AIT drive. Cleaning
starts automatically.
2
Cleaning takes from a few seconds to a minute for the
SDX-1100V, SDX-900V, and SDX-800V
is automatically ejected when finished.
*
The cleaning time varies depending on the condition of the drive.
Caution
Do not rewind the cleaning cartridge and reuse it. When you reach the
end of the cartridge, dispose it and buy a new cleaning cartridge with
the AIT logo.
Storage Precautions
• Keep cartridges in their cases when not in the drives.
• Avoid storing cartridges in dusty locations, in direct sunlight, near heaters
or air conditioners, or in humid locations.
• Do not place cartridges on dashboards or in car storage trays.
Emergency Tape Removal Procedure
1
Remove the drive from the chassis or enclosure to allow
access to the bottom of the drive.
2
Remove the drive's top cover.
3
Locate the small opening in the bottom of the drive and
insert the tip of a precision screwdriver so that the Loading
motor shaft can be rotated.
22
*
, and the cartridge