Advertisement
Quick Links
02/2025
TimberGlow
Wood Burning Sauna Heater
Installation Instructions
(Chimney Out the Side/Back)
Requirements:
2 People (recommended)
Cordless Drill
Tape Measure
Phillips & Robertson Drill Bits
Step Ladder
2" hole Saw
11mm Socket
Jig Saw
13mm Socket
Carpenters Level
Advertisement
Summary of Contents for leisurecraft TimberGlow
- Page 1 02/2025 TimberGlow Wood Burning Sauna Heater Installation Instructions (Chimney Out the Side/Back) Requirements: 2 People (recommended) Cordless Drill Tape Measure Phillips & Robertson Drill Bits Step Ladder 2” hole Saw 11mm Socket Jig Saw 13mm Socket Carpenters Level...
- Page 2 Wood Burning Sauna Heater Installation Instructions Congratulations on the purchase of your Leisurecraft Timberglow wood burning sauna heater. Please read this entire manual before proceeding with installation. Thank you for choosing Leisurecraft! It is highly recommended to view the assembly video prior to starting assembly! Click here to View the assembly process or scan the QR code.
- Page 3 TimberGlow Wood Burning Sauna Heater Installation Instructions Before Starting the assembly of your TimberGlow wood heater, remove the protective film from the heater shield and floor plate. Place the heat shield on the floor in the sauna where the stove will be.
- Page 4 Place the wall heat shield ensuring it is centered. Once in correct position, trace out the opening of the heat shield and then put the shield aside for the time being. Cut out the opening with a jig saw. Manufactured by: tel: 888-923-9813 | info@leisurecraft.com| web: www.leisurecraft.com...
- Page 5 Remove the protective film from the chimney stacks. Place the 2 chimney stacks together and secure with the included bracket. Manufactured by: tel: 888-923-9813 | info@leisurecraft.com| web: www.leisurecraft.com...
- Page 6 Place the wall support piece, ensure the chimney is level and mark the position of the sides of the wall support bracket. Secure the 2 wall brackets together with the provided nuts and bolts. Manufactured by: tel: 888-923-9813 | info@leisurecraft.com| web: www.leisurecraft.com...
- Page 7 Install the bottom half of the exterior chimney shield using 1 ½” (38mm) screws ensuring it is level. Overlap the top half of the exterior chimney shield and secure with provided screws. Manufactured by: tel: 888-923-9813 | info@leisurecraft.com| web: www.leisurecraft.com...
- Page 8 Install the cap on the top of the assembled chimney. Place the rocks in the heater until they are 2” (51mm) above the top of the heater. Congratulations! Your installation is now complete. Manufactured by: tel: 888-923-9813 | info@leisurecraft.com| web: www.leisurecraft.com...
-
Page 9: Warranty
WARRANTY Dundalk LeisureCraft Inc. warrants our saunas against defects in materials and workmanship under normal/residential use for a period of five (5) years, as applicable, from the date of receipt of the product by the original end-user consumer. This warranty does not apply to normal wear and tear and/or natural weather conditions.
Need help?
Do you have a question about the TimberGlow and is the answer not in the manual?
Questions and answers