Sony TC-FX430 Service Manual

MICROFILM
US Model
Canadian Model
AEP Model
UK Model
TC-FX433:
US Model
Photo: TC-FX430
Recording system 4-track 2-channel stereo Frequency response
Fast-forward and rewind time
DOLBY NR OFF
Approx. 100 sec. (with C-60 cassette) e With TYPE IV cassette (Sony METAL-ES)
Blas frequency 105kHz
20 -16,000 Hz
Signal-to-noise ratio (NAB, at peak level)
30 -15,000 Hz (+3 dB)
30 -13,000 Hz (+3 dB, 0 VU recording)
30 -15,000 Hz (DIN)
e with TYPE Il cassette (Sony UCX)
20 -15,000 Hz
30 -14,000 Hz (+3 dB)
30 -14,000 Hz (DIN)
e With TYPE | cassette (Sony HF-S)
PP ay NR switch B-TYPE ON | C-TYPEON
eset
TYPE IV (Sony METAL-ES) | 58dB 65 dB
TYPE II (Sony UCX) 56dB 63dB 69 dB
TYPE | (Sony HF-S) 54 dB 61dB 67dB
20 - 14,000 Hz
Total harmonic distortion 30 - 13,000 Hz (DIN)
1.0% (with Sony METAL-ES cassettes) Wow and flutter 0.08% WRMS (NAB)
+0.2% (DIN)
Inputs Microphone inputs (phone jacks)
SAFETY-RELATED COMPONENT WARNING!! Sensitivity 0.25 mV (-70 dB)
COMPONENTS IDENTIFIED BY SHADING AND MARK For a low-impedance microphone
A\ ON THE SCHEMATIC DIAGRAMS AND IN THE Line inputs (phone jacks)
PARTS LIST ARE CRITICAL TO SAFE OPERATION. Sensitivity 77.5 mV (-20 dB)
REPLACE THESE COMPONENTS WITH SONY PARTS Input impedance 47 kilohms
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS Outputs Line outputs (phono jacks)
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. Output level 0.44 V (-5 dB) at load impedance
47 kilohms.
ATTENTION AU COMPOSANT AYANT RAPPORT Load impedance over 10 kilohms
A LA SECURITE! Headphone output (stereo phone jack)
Output level —28 dB at a load impedance of 8
LES COMPOSANTS IDENTIFIES PAR UNE TRAME ET ohins
UNE MARQUE A SUR LES DIAGRAMMES SCHE-
MATIQUES ET LA LISTE DES PIECES SONT CRITIQUES
POUR LA SECURITE DE FONCTIONNEMENT. NE REM-
PLACER CES COMPOSANTS QUE PAR DES PIECES
SONY DONT LES NUMEROS SONT DONNES DANS CE
MANUEL OU DANS LES SUPPLEMENTS PUBLIES PAR