User Interface - Samsung GT-N8013 User Manual

Development Device ID
The identification number for your tablet when using it as a
development tool displays in this field.
Allow Mock Locations
This setting is used by developers when developing
location-based applications.
Note: This setting is used for development purposes.
1. From a Home screen, touch
Developer options.
2. Touch Allow mock locations to enable or disable the
setting.
When enabled, a check mark
box.
Desktop Backup Password
Protect the desktop with a backup password ID.
1. From a Home screen, touch
Developer options.
2. Touch Desktop backup password.
Apps Settings
appears in the check
Apps Settings
3. In the Settings screen, enter the current full backup
password, the new password for full backups, then
enter the new password again.
4. Touch Set backup password to save the password
change.

User Interface

Configure the user interface by setting the behavior for the
way the screen behaves when using applications or
displaying data.
1. From a Home screen, touch
Developer options.
2. Touch the check box next to each option to enable:
• Strict mode: Makes the screen flash when applications
perform long operations on the main thread.
• Show pointer location: Highlights the data that was touched
on the screen.
• Show touches: Displays touch interactions on the screen.
• Show screen updates: Areas of the screen flash when they
update.
• Show CPU usage: Screen highlights the current CPU usage.
• Force GPU rendering: Uses a 2D acceleration in applications.
Apps Settings
Settings 206