Advertisement
Quick Links
Bluetooth Reconnect.
®
If you have Bluetooth reconnect issues,
then cycle the power of the speaker:
Using the supplied remote button,
switch the unit off for 5 seconds and then
switch the unit back on and wait for the
speaker to tone and then reconnection
should occur.
If not, recheck the phone's bluetooth
connection, cycle it on/off and repair.
The button on the speaker is not necessary
for pairing or repairing or general operation.
/
ESC
LED
BUTTON:
The button next to the LED on the Accento-Dynamica fascia is intended for
installation servicemen to test for successful connections and is not required
for general operation. If currently paired (LED is BLUE) then:
Short Button Press: will pause playback, press again commences playback.
Long Button Press: will disconnect the current Bluetooth
and the unit is ready to pair again. LED is RED (See pairing instructions).
240Vac Power Pack
RF Remote Power Switch
RF Remote
Power Switch
®
connection,
ADS8-100BT
Amplifier RMS:50W X2
Amplifier Maximum Power:100W X2
AC 240V IN, DC 24V 2.5A OUT
Bluetooth
®
VER4.1+EDR
Distance 10M
Advertisement
Related Manuals for Accento Dynamica ADS8-100BT
Summary of Contents for Accento Dynamica ADS8-100BT
- Page 1 RF Remote Power Switch should occur. If not, recheck the phone’s bluetooth ADS8-100BT connection, cycle it on/off and repair. RF Remote The button on the speaker is not necessary Power Switch for pairing or repairing or general operation.
- Page 2 240Vac Power Pack RF Remote Power Switch WELCOME: Thank you for your purchase of the Accento-Dynamica Bluetooth Ceiling Speaker. ® Operation is completely hands-free and pairing is easy with no pass key required. DC Plug Once power is connected, simply pair and stream. The pairing name is "ACCENTO". RF Remote OPERATION: Power connection:...
Need help?
Do you have a question about the ADS8-100BT and is the answer not in the manual?
Questions and answers