KZ ZS10 PRO X Manual

Device operation

Install your preferred silicone ear tips – from left: size L, size M and size S.

Correctly distinguish between the right and left earbud and cables, as shown in the image below. There are left and right markings on the cable, "L" is on the left and "R" is on the right. Insert the cable plugs into the earbud sockets.

Place the earbuds in your ears according to their markings as shown in the picture below. Route the cables of the earbuds over and then behind the ears.

Connect the KZ ZS10 PRO X plug to the external device. Remember to adjust the volume before connecting KZ ZS10 PRO X to the device.

Safety rules

	Please read the user manual in detail before use. Please also keep it for future reference. The manual contains rules for the safe use of the device.
	After receiving the product, please unpack and check whether it is complete and whether there is any damage caused by transportation. If there is damage caused by transportation, please do not use this product and contact the dealer or manufacturer as soon as possible.
	Keep the device away from children and unqualified persons. The manufacturer is not liable for damage caused by improper use.
	Before use, make sure the housing is not damaged!
	Do not operate for a long period of time at a high volume level! It could result in damage or loss of hearing!

Maintenance

1. The device may only be used by qualified personnel, damage caused by improper use or attempted repair is not covered by the warranty. There are no service parts inside the packaging, repairs may only be carried out by authorized service center.
2. Do not allow the device to come into contact with oil, grease or any similar liquid.
3. Regular cleaning allows you to use the device for a long time and maintain a sufficiently high performance. Use a soft cloth to clean the device.