Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Yokota YZ-NP600E
Summary of Contents for Yokota YZ-NP600E
- Page 1 YZ-NP600E Manual www.rami-yokota.com...
- Page 2 Before taking into use Read and understand the contents of this manual before installing, operating, repairing, maintaining, changing accessories of this tool. Only qualified and trained operators should install, adjust or use the tool. Charging the battery Slide the battery in the charger, this should go smoothly otherwise the alignment isn't correct or the battery / charger grooves are damaged.
- Page 3 Risk of explosion or fire: Make sure that generated sparks and/or increased temperature of the work piece can not cause any explosion or ignite a fire. Make sure that during operation of the tool no projectiles can be generated, this can be dangerous and may cause injuries.
- Page 4 Do not wear any shawls jewelry etc that can be trapped or entangled causing injuries. In case of power loss, release the trigger immediate. Make the possible countermeasures to minimize noise emission: if possible, use silence materials on the workpiece or walls around the work station.
- Page 5 Avoid damage of cord due to stepping, entangling, or unreasonable force, a damaged cable must be replaced immediate. Avoid pinching of power cord in the object to be tightened or surrounding facility in the tool operation and avoid the contact with rotating parts. The power cord may be damaged and it may result in accidents. Use the battery charger at rated supply voltage (AC 100-240 V).
- Page 6 Place the tool with the accessory on the bolt/nut screw. Pull the trigger to start the tool and release the trigger to stop the tool. Push the lever to start the tool and release the lever to stop the tool. Do not overtighten the bolt/nut/screw, a broken part can become a projectile causing danger or injury.
- Page 7 Only trained and qualified engineers are allowed to adjust or repair the tool. In case of disposal of the tool, follow local regulations, so as much as possible can be recycled. Do not throw it in the normal waste bin. The tool should be maintained regularly to minimize the noise emission and occurring vibration.
- Page 8 Warranty covers material or construction mistakes of the manufacturer, which are clearly definable. Replacement of parts or repair by an official Yokota/Red Rooster service workshop is free of charge, when the tool is covered by warranty. Freight or postage is for the account of the buyer. Damage attributable to a normal wear, overloading or incorrect use is excluded from warranty.
- Page 9 Type: YZ-NP600E Capacity: 8 - 25 0S0001 WE, RAMI YOKOTA B.V. , hereby declare that this product is conform the European Directive 2006/42/EG and, the standard EN ISO 11148-6 Technical file available from Rami Yokota BV: RAMI YOKOTA BV De Ruyterkade 120...
- Page 10 www.rami-yokota.com...
Need help?
Do you have a question about the YZ-NP600E and is the answer not in the manual?
Questions and answers