DAVIS Solaris SLB Installation Instructions

t
This installation guide is valid for the following models:
This installaon guide is valid for the
following models:
• Solaris SLB
• Wyplash – WPUS
• Solaris SLC
– WPUT
• Read all instructions to prevent injury, electric shock or damage
due to fire or mechanical hazards
• See product label for supply specifications
Inspect the luminaire and associated parts for any signs of defect, in particular fasteners, cables
and the diffuser or glass lens
DO NOT INSTALL THE LUMINAIRE IF IT APPEARS IN ANY WAY FAULTY
Consult with the supplier / sales office for details regarding replacement
Installaon is to be completed by a competent licensed electrician, in accordance with these instruco
•
relevant local regulaons.
Electronic control equipment must not be subjected to high voltages, DO NOT MEGGER between Live
•
Neutral.
• Suitable installation fastening methods should be employed to ensure the mounting points
All cable/conduit terminaons must be installed in accordance with the designated IP rang of this pr
•
are not damaged when subjected to vibration and / or movement
Suitable installaon fastening methods should be employed to ensure the mounng points are not da
•
when subjected to vibraon and or movement.
• This luminaire must be installed by qualified electrician in accordance with local rules and
The light source contained in this luminaire shall only be replaced by the manufacturer or his service a
•
codes
similar quali*ed person.
When using glands provided as cord anchorage for ,exible cable the cable diameter shall not be less t
•
• This luminaire cannot be disassembled by non-professional persons
mm and not larger than 12 mm.
• The light source contained in this luminaire shall only be replaced by the manufacturer or
his service agent or a similar qualified person.
• Prior to installation, products are to be stored in cool dry conditions
SOLARIS
Solar Streetlight
PRIOR TO INSTALLATION
CAUTION
CAUTION
DIMENSIONS
WPU
Wyplash
PRIOR TO INSTALLATION
• Read all instrucons to prev
injury, electric shock or damage
hazards
• See product label for supply
Solaris SLB
speci caons
• Suitable for recessed or
suspension mounng
Inspect the luminaire and associated parts for
any signs of defect, in parcular fasteners, cabl
and the di#user or glass lens
DO NOT INSTALL THE LUMINAIRE IF IT
APPEARS IN ANY WAY FAULTY
Consult with the supplier / sales o'ce for deta
regarding replacement
230222
Installation
Instructions
due to re or mechanical
Solaris SLC
In
Ins