Summary of Contents for Forest-Master FM3-FS
- Page 1 FM3-FS FARM JACK USER MANUAL IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY BEFORE OPERATING EQUIPMENT...
- Page 2 NOTICE All references to max tonnage will be marked with an *. Please refer to this in When not in use, always support the FM3-FS or lay it on its side to those instances. avoid it tipping over as this can potentially cause serious injuries or MAX LOAD: 3000 KG * death.
-
Page 3: Usage Overview
CAUTION www.forest-master.com www.forest-master.com • This FM3-FS will not stabilize a load. The load must be securely chocked and Before using the FM3-FS Farm Jack, make sure to read the General Safety Rules blocked (stabilised) to prevent it from falling. section in the product manual. - Page 4 Do not use Jack to support a load: 3.Only jack at manufacturer approved points. The FM3-FS Farm Jack is designed to lift loads, not to support them. Never use the jack to support a load. Always chock and block the load to ensure its stability during the lifting operation.
- Page 5 LOWERING A LOAD Before using the FM3-FS Farm Jack, read the General Safety Rules section in the product manual. Usage: The lifter must have a minimum load of 50kg (101lbs) to lower step by step;...
- Page 6 Lubrication: Using the FM3-FS Farm Jack without proper lubrication will result in poor performance and possible damage to the tool. The tool is not self-lubricating, so inspect the lifting mechanism before use and lubricate when necessary.
-
Page 7: Customer Service
Small Runner Spring Washer REPAIRS Should you need to repair your FM3-FS, use only genuine Forest Master Parts supplied by Forest Master. Using parts supplied by a third party may make your tool unsafe for use and void your warranty.
Need help?
Do you have a question about the FM3-FS and is the answer not in the manual?
Questions and answers