CONTENTS Topic Page INTRODUCTION Scope of supply Receipt of goods Storage TECHNICAL DATA Technical data Dimensions Drilling pattern Compatible mounting brackets Connection diagrams OPERATION OF THE CONTROLLER Installation and safety instructions COMMISSIONING Installation of the controller OPERATION & MAINTENANCE NOTES...
Page 3
- FOR DISPOSAL Please follow these instructions for proper and safe The WEEE logo indicates that this product must not be disposed use of the ELTC-05 frost protection thermostat. of with residential waste. Please retain these instructions for later reference purposes (for Further information about disposal and recycling of old electri- example in the system documentation).
INTRODUCTION The electronic temperature controller of the ELTC-05 series can be used as an air or surface thermostat with remote sensor. Cable glands and terminals are fitted for the electrical connection. The device is supplied in a splash-proof plastic housing for wall mounting, which is fitted with a grey housing cover.
Prepare the cable ends for installation (strip the insulation). Please observe the relevant assembly instructions. • Check all parts of the ELTC-05 as well as the seals and • Insert the cable into the housing according to type and O-rings.
IP protection class) must be observed. • A visual inspection to ensure that the ELTC-05 is intact NOTE and firmly seated must be carried out at suitable intervals depending on the installation location and application.
Page 8
This document can also be found on the eltherm website. Visit our download area. eltherm GmbH Ernst-Heinkel-Straße 6 -10 57299 Burbach. Germany T.: +49 2736 4413-0 F.: +49 2736 4413-50 info@eltherm.com www.eltherm.com...
Need help?
Do you have a question about the ELTC-05 and is the answer not in the manual?
Questions and answers