Related Manuals for Beko BDFN36651XC
Summary of Contents for Beko BDFN36651XC
- Page 1 Dishwasher User’s Manual BDFN36651XC BDFN36651BG 17 7943 0100_AC_BEKO_B8_EN/ 07-06-24.(12:51)
-
Page 2: Explanation Of Symbols
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use. -
Page 3: Table Of Contents
CONTENTS 1 INSTRUCTIONS FOR SAFETY adjustable service rack ..... 24 Lower basket bottle wire ....25 AND ENVIRONMENT Upper basket height adjustable rack 25 General safety ........4 Upper basket multipurpose service Intended use ..........4 rack ............25 Children’s safety ........5 Adjusting the height of the upper Disposing of packaging material ..5 basket .......... -
Page 4: Instructions For Safety And Environment
instructions for safety and environment This section contains safety Never touch the plug with • instructions that will help to get wet hands! Never unplug by protected from risk of personal pulling on the cable, always injury or property damage. Failure pull out by grabbing the plug. -
Page 5: Children's Safety
instructions for safety and environment Children’s safety This appliance is intended • to be used in household and Electrical products are • similar applications such as: dangerous for the children. - Staff kitchen areas in shops, Keep children away from the offices and other working product when it is in use. -
Page 6: Compliance With Weee Directive And Disposing Of The Waste Product
instructions for safety and environment Package information 1. Unplug the product before transporting it. Packaging materials of the 2. Remove water drainage and product are manufactured water supply connections. from recyclable materials in accordance with our National 3. Drain the remaining water in Environment Regulations. -
Page 7: Dishwasher Overview
Dishwasher Overview 1. Upper basket 2. Upper impeller 3. Lower impeller 4. Cutlery basket (depends on model) 5. Door 6. Rating Label 7. Control panel 8. Detergent dispenser 9. Lower basket 10. Filters 11. Salt reservoir lid 12. Upper basket rail 13. -
Page 8: Fan Drying System
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label) -
Page 9: Installation
Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your product. To location make the product ready for use, make sure Place the product on a solid and flat • that the electricity, tap water supply and floor that has sufficient load carrying water drainage systems are appropriate capacity! The product must be... -
Page 10: Connection To The Drain
Installation Connection to the drain Permitted water temperature: up to 25°C ( 60°C for products Water discharge hose can directly be equipped with Aquasafe+; please connected to the drain hole or sink’s refer toAquasafe+ section ) drainage. The length of this connection The dishwasher may not be connected to must be min. -
Page 11: Aquasafe
Installation Aquasafe+ Connection must comply with national • regulations. (depends on model) Power cable plug must be within easy • The Aquasafe+ system protects against reach after installation. water leaks that may occur at the hose inlet.Water contact with the valve box of Unplug the product after the the system must be avoided to prevent washing programme is over. - Page 12 Installation To prepare the product to do the • dishes, perform first operation in the shortest programme with detergent while the machine is empty. During the initial use, fill the salt reservoir with 1 litre of water prior to filling it with salt. There might be a small amount of water left in the product after factory quality control...
-
Page 13: Preparation
Preparation Adjusting the water Read “Safety Instructions” section first! softening system Tips for energy saving Cleaning, rinsing and drying performance of Following information will help you use your dishwasher will increase when water the product in an ecological and energy- softening system is adjusted properly. - Page 14 Installation Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for the water for about strip from the water you the hardness packet.
-
Page 15: Adjusting The Water Softening System
Preparation If you move your house, it is necessary to readjust water hardness level of your machine by considering the information given above according to the hardness level of the supply water in your new location. Your machine will display the most recently adjusted water 12,3-14,7 0,05... -
Page 16: Adding Salt
Preparation Adding salt Water softening system needs to be regenerated in order for the product to operate with the same performance continuously. Dishwasher salt is used for this purpose. Use only special softening salts produced particularly for the dishwashers in your machine. You can put about 2 kg of softening It is recommended to use granule- or salt into the salt reservoir. - Page 17 Preparation the manufacturer of the detergent for further questions. Do not put solvents into the detergent dispenser. There is the risk of explosion! Put the detergent into the detergent dispenser just before operating the machine as illustrated below. Push the latch to right to open the detergent dispenser lid (A).
-
Page 18: Tablet Detergents
Preparation Tablet detergents 2. Set the water hardness to the highest level and perform an empty run. In addition to the conventional tablet 3. After the empty washing cycle, review detergents, there are also commercially the user manual and readjust the water available detergent tablets that show water hardness level so as to suit the water softening salt and/or rinse aid effect. -
Page 19: Items Not Suitable For Washing In The Dishwasher
Preparation Decorative prints of chinaware as well 3. Slightly press the point (B) of the as aluminium and silver items may get reservoir lid to close it. discoloured or tarnished after washing in the dishwasher just as it happens in handwashing as well. - Page 20 Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware /53 EN...
-
Page 21: Cutlery Basket
Preparation Cutlery basket Cutlery basket (depends on model) (depends on model) Cutlery basket is designed to wash your Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an dishes such as knife, fork, spoon, etc. in an efficient manner. -
Page 22: Collapsible Lower Basket Tines
Preparation Collapsible lower basket Collapsible lower basket tines tines (depends on model) (depends on model) There are foldable tines (A) located at the There are foldable tines (A) located at the lower basket of the machine are designed lower basket of the machine are designed for an easier placement of large pieces such for an easier placement of large pieces such as pans, bowls, etc. -
Page 23: Tray Wash Supports
Preparation Tray Wash Supports SoftTouch Accessory (depends on model) (depends on model) Use the supports to wash trays in the The SoftTouch Accessory found in the bottom basket. lower basket of your machine enables a See the Auxiliary functions section for safe washing for your fragile glasses. -
Page 24: Lower Basket Multipurpose / Height Adjustable Service Rack
Preparation Lower basket multipurpose Make sure that the impeller / height adjustable service does not touch the dishes you rack placed on the racks. (depends on model) To close the racks: This accessory located at the lower basket Fold the rack (A). of your machine allows you to easily wash 2. -
Page 25: Lower Basket Bottle Wire
Preparation Lower basket bottle wire Upper basket multipurpose service rack (depends on model) The bottle wire is designed for easier (depends on model) washing of long pieces with wide mouths. This accessory located at the upper basket You may take out the bottle wire from the of your machine allows you to easily wash basket when not in use by pulling it out pieces such as extra long ladles and bread... -
Page 26: Adjusting The Height Of The Upper Basket
Preparation Adjusting the height of the To lower the basket, while it is in the uppermost position; upper basket Hold the upper basket wires with both (depends on model) hands, slightly lift up the basket and The upper basket height adjustment simultaneously push and release the mechanism has been designed for you to latches shown in the figure (B). -
Page 27: Adjusting The Height Of The Upper Basket
Preparation Adjusting the height of the To raise the basket, hold the wires of the basket and pull the basket upwards upper basket with both hands while the basket is at (depends on model) the lowermost position (B) Upper basket height adjustment 2. -
Page 28: Bottle And Dish Holder On The Lower Basket
Preparation Bottle and Dish Holder on Tray Washing Support (depends on model) the Lower Basket You may use the tray washing supports (depends on model) if you want to wash a tray on your lower Bottle and dish holder (A) on the lower basket. -
Page 29: Collapsible Upper Basket Wires
Preparation Collapsible upper basket Height setting with empty wires basket (depends on model) (depends on model) You can use collapsible wires when you In this model, the height setting of the need a larger space for your dishes in the upper basket may be changed using the upper basket of your machine. -
Page 30: Ceiling Cutlery Basket
Preparation Ceiling cutlery basket (depends on model) Ceiling cutlery basket is designed to wash your cutlery items such as forks, spoons and etc. by placing them between the bars on the basket. When the central tray is in the lower position, you can load long/high items such as coffee cups, ladles, etc. -
Page 31: Operating The Product
Operating the product On / Off Button 2. Program Selection Button 3. Low Salt Warning Indicator 4. Low Rinse Aid Warning Indicator 5. Program Running Indicator 6. Display 7. Function Selection Button Hygiene Intense function SteamGloss Function Deep Wash function TimeDelay function Fast+ Function Remote Control function... -
Page 32: Program Selection/Program Cancellation Button
Operating the product Program selection Power On/Off Button When you press the On/Off button, the Turn on your machine by pressing the indicator lights turn on at On position On/Off button when the door is closed. on the display. They turn off at the Off 2. - Page 33 Operating the product 33 / 53 EN...
- Page 34 Operating the product /53 EN...
-
Page 35: Auxiliary Functions
Operating the product Auxiliary functions Deep Wash Do not attempt to Washing programmes of your dishwasher remove the impeller part! are designed to obtain the best cleaning effect, considering the type of the soiling, Selecting this function extends soiling degree and properties of the dishes the program period. -
Page 36: Child (Key) Lock Function
Operating the product Changing the SelfDry setting Once the program has started, Activating the SelfDry Function: the program and auxiliary (depends on the model) functions cannot be set/ Press and hold the F4 and F5 changed. simultaneously to activate the SelfDry To cancel the delay function: function, when the door is closed. -
Page 37: Interior Lighting
Operating the product Interior Lighting Child Lock prevents changing (Depends on the Model) of the selected functions and Suitable models are equipped with a deactivates the Start/Pause/ light that illuminates the interior of your Cancel key. machine when the door is opened. When the door is closed, after turning Child lock does not lock the door on your machine with the On/Off... -
Page 38: Sub-Menu Functions
Operating the product Functions Under the Settings EverClean Function Disabled/Enabled Menu (depends on the model) Additional functions are available under the settings menu of your machine depending on the model. When the door is closed, after turning on your machine with the On/Off button, enter the Sub-Menu by pressing the On-Off IonGuard Function Disabled/Enabled and P2 program buttons simultaneously... -
Page 39: Starting Of The Program
Operating the product Starting of the program Detergent or rinse aid may Close the door to start your machine after remain inside the machine and/ selecting the program and additional or the dishes being washed as functions. per the step of the program you have cancelled. -
Page 40: Innerclean
Operating the product Water overflow warning 4. Exit the settings menu by pressing the On/Off button for 3 seconds. Your If too much water flows into the machine settings will be saved automatically. or if there is a leak in any part, the machine No rinse aid is applied in washing will detect an overflow and the E:01 program at P:0 position. -
Page 41: Homewhiz Function
HomeWhiz Function Display view when the HomeWhiz function Read the “Safety Instructions” is turned. section first! Thanks to the HomeWhiz feature, you can control your dishwasher from your smart device and get information about the status of your machine. HomeWhiz function only HomeWhiz Setup and User Account operates at 2.4GHz frequency Settings... - Page 42 HomeWhiz Function 5. Return to HomeWhiz app after Using the dishwasher from multiple devices connecting your smart device to the HomeWhiz network. On the app, you You can use your dishwasher from multiple can see the dishwasher you are adding. smart devices.
- Page 43 HomeWhiz Function You can see the products You can monitor from the paired with your account by indicator on the product tapping the “Add/Remove whether the wireless Product” button on the connection is on or off. If “Products” page in the app. You the wireless connection is may perform the user pairing disabled, you can see that the...
-
Page 44: Product
HomeWhiz Function Press the HomeWhiz button again for 5 Changing the Downloaded seconds and it connects to the network you Program previously connected. You can use the HomeWhiz application to Deleting the HomeWhiz settings change the Downloaded Programme, which While the dishwasher is turned on, press is the last program on the product. - Page 45 HomeWhiz Function If you download another program on the product, your previous selection will be cancelled. You can download as many programs as you wish on the product, and change the Downloaded Program whenever you want. You just need to make sure that your smart device and product are connected to the internet and the Remote...
-
Page 46: Maintenance And Cleaning
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in cleaned at regular intervals. order for the machine operates efficiently. Unplug the product and turn off Check if food residues are left on the filters. -
Page 47: Cleaning The Hose Filter
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose. -
Page 48: Upper Impeller
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers for the machine to work Check if the holes on the upper impeller (1) efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to remove the upper impeller. -
Page 49: Troubleshooting
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •... - Page 50 Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
- Page 51 Troubleshooting the filling process. Run the prewash programme to remove the salt that spilled inside the machine. Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour.
- Page 52 Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
- Page 53 Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.
Need help?
Do you have a question about the BDFN36651XC and is the answer not in the manual?
Questions and answers