Advertisement
Quick Links
Advertisement
Related Manuals for DeWalt US 48A
Summary of Contents for DeWalt US 48A
- Page 1 DeWalt US 48A Hardwired Wallbox User manual...
-
Page 2: Table Of Contents
Read all instructions before using this product. Save these instructions. This manual contains important instructions for the DeWalt US 48A Hardwired Wallbox that shall be followed during installation, operation, and maintenance. Please review all warnings and cautions before installing and 2. -
Page 3: Important Important Safety Information
WARNING: Do not insert fingers or foreign objects into any part of the Wallbox. WARNING: Do not attempt to disassemble, repair, tamper with, or modify the Wallbox. The Wallbox is not user serviceable. Contact DEWALT for any repairs or modification. CAUTION: Incorrect installation and testing of the Wallbox could potentially damage the vehicle's Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio... - Page 4 Important Information er iew Overview This type of products is charging wallbo s that can be used to charge electric powered ehicles in indoor and outdoor areas e.g. electric ehicles This manual applies to Wall identified by part number Indicated When installing and connecting the charging wallbo the regulations of each country shall be obser ed.
-
Page 5: The Use Of Charging Wallbox The Use Of Charging Wallbox
The use of charging wallbox 3.2.1 Inspection before use THE USE OF CHARGING WALLBOX Make sure that the product is not scratched, rusted, cracked, etc. Instructions Make sure that there are no foreign objects inside the power plug and socket, for use vehicle plug and socket. -
Page 6: Precautions For Use
Description Liquid Crystal Display Recommend solution 3.2.5Precautions for use The current power grid voltage is Warning Please do not unplug the charging gun when charging is not low, power off and wait for 5s to lamps power on again. If the fault does not finished, otherwise there is a danger of electric shock! Under-voltage E1 Under Voltage... -
Page 7: Customer Service
Customer service Installation instructions Electrical grounding is very important in electrical operation, and the safety of people and equipment mostly depends on the integrity and safety degree of Product name Electrical grounding equipment. If the grounding equipment is not firm, unreliable, and grounding does not meet the requirements of the regulations, it will inevitably cause Product model... -
Page 8: Product Installation
Warranty card Installation instructions 1. Installation tools: Product installation The installation location of the charging wallbox shall not be close to dangerous locations such as water pipes, gas pipes, and steam pipes. * Pencil or marker * Impact drill * Tape measure * Phillips screwdriver REQUIREMENTS This device shall be mounted at a sufficient height from grade such that the height of... -
Page 9: Warranty Card
Warranty card Installation instructions 4. Installation steps (wall-mounted type) Installation of the back plate Recommend ed height is 0.9±0.1m Using a spirit l l to Mark the 4 screw holes with a position the back plate. pencil, pay attention to the installation direction of the back plate bracket. - Page 10 WARNING/ AVERTISSEMEN his device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the US 48A and is the answer not in the manual?
Questions and answers