Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for LTS Security LXK102-K
Summary of Contents for LTS Security LXK102-K
- Page 1 Keypad Access Reader LXK102-K User's Manual V1.0.0...
-
Page 2: Foreword
Foreword General This manual introduces the functions and operations of the access reader. Read carefully before using the device, and keep the manual safe for future reference. Safety Instructions The following signal words might appear in the manual. Signal Words Meaning Indicates a high potential hazard which, if not avoided, will result in death or serious injury. - Page 3 ● There might be errors in the print or deviations in the description of the functions, operations and technical data. If there is any doubt or dispute, we reserve the right of final explanation. ● Upgrade the reader software or try other mainstream reader software if the manual (in PDF format) cannot be opened.
-
Page 4: Important Safeguards And Warnings
Important Safeguards and Warnings This section introduces content covering the proper handling of the access reader, hazard prevention, and prevention of property damage. Read carefully before using the Card Reader, and comply with the guidelines when using it. Transportation Requirement Transport, use and store the access reader under allowed humidity and temperature conditions. -
Page 5: Operation Requirements
Operation Requirements ● Check whether the power supply is correct before use. ● Do not unplug the power cord on the side of the access reader while the adapter is powered on. ● Operate the access reader within the rated range of power input and output. ●... -
Page 6: Table Of Contents
Table of Contents Foreword ..............................I Important Safeguards and Warnings ......................III 1 Product Overview ............................1 1.1 Introduction............................1 1.2 Appearance ............................1 1.3 Dimensions ............................2 2 Ports and Installation..........................3 2.1 Port Overview ............................ 3 2.2 Installation Procedure ........................3 3 Unlocking the Door ............................ -
Page 7: Product Overview
1 Product Overview 1.1 Introduction In most access control systems, an access reader is a security system that requires a swipe of a credential card to verify the person entering the room/space is cleared. It is suitable for a wide variety of scenes such as office buildings, schools, compounds, communities, factories, public venues, business centers and government buildings. -
Page 8: Dimensions
1.3 Dimensions Figure 1-2 Dimensions (Model M) (mm [inch]) -
Page 9: Ports And Installation
2 Ports and Installation 2.1 Port Overview Table 2-1 Port overview Color Port Description 12 V Power supply Black Blue CASE Anti-tampering alarm signals(for Wiegand access reader) White Wiegands transmission signals (for Wiegand card reader) Green Brown Wiegand responsive signals (for Wiegand access reader) Yellow RS–485_B RS-485 access reader... - Page 10 Figure 2-1 Drill holes (mm[inch])
-
Page 11: Unlocking The Door
3 Unlocking the Door Swipe card on the access reader to open the door. For access reader with keypad, you can also unlock the door by entering the user ID and password. ● Unlock the door through public password: Enter the public password, and then tap #. ●... -
Page 12: Updating The System
4 Updating the System 4.1 Updating through X Station Prerequisites ● The access reader was added to the access controller through RS-485 wires. ● The access controller and access reader are powered on. Procedure Step 1 Install and log in to X Station, and then select Device Manager. Step 2 Click Figure 4-1 Select the access controller... -
Page 13: Appendix 1 Security Recommendation
Appendix 1 Security Recommendation Account Management 1. Use complex passwords Please refer to the following suggestions to set passwords: ● The length should not be less than 8 characters; ● Include at least two types of characters: upper and lower case letters, numbers and symbols; ●... -
Page 14: Network Configuration
It is recommended that you change the default port of HTTP and other services to any port between 1024 and 65535 to reduce the risk of being guessed by threat actors. Network Configuration 1. Enable Allow list It is recommended that you turn on the allow list function, and only allow IP in the allow list to access the device. - Page 15 as placing the device in a dedicated machine room and cabinet, and having access control and key management in place to prevent unauthorized personnel from damaging hardware and other peripheral equipment (e.g. USB flash disk, serial port).
Need help?
Do you have a question about the LXK102-K and is the answer not in the manual?
Questions and answers