GET STARTED The V-6022WC is a 2 Megapixel indoor video camera that allows users to view live and recorded HD video clips in Virtual Keypad™. To activate the camera, you need an active Dealer Admin account at dealer.securecomwireless.com. Compatibility Any active Virtual Keypad account with Cameras & NVRs enabled ▶...
Page 3
To use this camera with a Wi-Fi connection, connect a 5 VDC power source to the camera power connector. You can optionally connect a network cable to the camera Ethernet connector. Note: The V-6022WC does not support POE. Ethernet Reset 5 VDC Power Figure 1: Camera Power Details V-6022WC Installation and Programming Guide | Digital Monitoring Products...
Page 4
Note: If you do not have a Dealer Admin login, on the log in page, select Generate QR Code and follow steps 6-8. Call your Dealer Admin Administrator to add the camera to a system using the MAC address. V-6022WC Installation and Programming Guide | Digital Monitoring Products...
MOUNT THE CAMERA The V-6022WC is suitable for stand, wall, and ceiling mounting applications. Refer to Figure 3 during mounting and camera adjustment. Wall or Ceiling Mount Ceiling mounting will be covered as an example in this section. However, the same steps may be referenced for wall mounting.
Page 6
Dealer Admin will populate a 4-point rectangle in camera view screen. Click and drag an endpoint to change the size of the region. admin@gmail.com Admin User Admin Home Figure 5: Configure a Motion Detection Region in Dealer Admin V-6022WC Installation and Programming Guide | Digital Monitoring Products...
Need help?
Do you have a question about the V-6022WC and is the answer not in the manual?
Questions and answers