Skoda SUPERB - 05-2009 Manual page 250

Raise vehicle
You have to raise the vehicle with a lifting jack in order to be able to
take off the wheel.
Position the lifting jack by selecting the jacking point which is closest to
the wheel to be removed
below the engraving in the lower sill.
– Position the lifting jack below the jacking point and move it up until its
claw is positioned directly below the vertical web of the lower sill.
– Align the car jack so that its claw grasps the web of the lower sill
A
and the base plate
B
– Turn the lifting jack up further until the wheel is just clear of the
ground.
Ground below the lifting jack which is soft and slippery can cause the vehicle to
slip off the jack. It is therefore always necessary to place the lifting jack on a solid
surface or use a wide and stable base. Use a non-slip base (e.g. a rubber foot mat)
if the surface is smooth, such as cobbled stones, a tiled floor, etc.
WARNING
•
Always raise the vehicle with the doors closed - risk of injury!
Using the system Safety
Fig. 220 Changing a wheel:
Points for positioning car jack
⇒ fig.
220. The jacking point is located directly
is resting flat on the floor.
Driving Tips
WARNING (continued)
•
Take suitable measures to prevent the base of the lifting jack from slip-
ping off - risk of injury!
•
Not positioning the lifting jack at the specified points can result in
damage to the vehicle. The jack can also slip off if it does not have sufficient
grip - risk of injury!
•
It is important to support the vehicle with suitable supporting blocks if
you wish to work under the lifted vehicle - risk of injury!
Securing wheels against being stolen*
You need a special adapter for slackening the safety wheel bolts.
A
A
– Pull off the full wheel trim/cap from the wheel hub or cap from the
safety wheel bolt.
A
– Insert the adapter
of the safety wheel bolt
outer hexagon is jutting out
– Insert the wheel wrench fully onto the adapter
– Slacken the wheel bolt, or tighten it firmly ⇒ page 248.
General Maintenance
Breakdown assistance
Fig. 221 Safety wheel bolt
with adapter
with its toothed side fully into the inner toothing
B
A
right down in such a way that only the
A
⇒ fig.
221.
A
.
B
Breakdown assistance Technical Data
249