1. Manuals
  2. Brands
  3. Traxon Technologies Manuals
  4. Computer Hardware
  5. ECUE SYMPL essential2 Node
  6. Information for use

Traxon Technologies ECUE SYMPL essential2 Node Information For Use

Hide thumbs

Advertisement

Table of Contents

SYMPL essential2 Node
Information for Use
Read the Information for Use and the Safety Instructions
carefully. Subject to modification without prior notice.
Typographical and other errors do not justify any claim for
damages. Modification of the product is prohibited.
This document is designed for electricians and system
administrators of the product.
All product names and trademarks mentioned in this manual are
trademarks of their respective owners.
Except for internal use, relinquishment of the instructions to a
third party, duplication in any type or form - also extracts - as
well as exploitation and / or communication of the contents is not
permitted.
Downloads and more information at:
www.ecue.com
IC: AM466930031
Edition:
09.05.25 [EN_SYMPL_essential2_Node_Setup_v3p0]
Published by:
Traxon Technologies Europe GmbH
Karl-Schurz-Strasse 38
33100 Paderborn, Germany
©2025 Traxon Technologies Europe GmbH
All rights reserved
Traxon Technologies Europe GmbH
Sales Operations
Karl-Schurz-Str. 38
33100 Paderborn, Germany
+49 5251 54648-0
support@ecue.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECUE SYMPL essential2 Node and is the answer not in the manual?

Questions and answers

Summary of Contents for Traxon Technologies ECUE SYMPL essential2 Node

  • Page 1 33100 Paderborn, Germany third party, duplication in any type or form - also extracts - as well as exploitation and / or communication of the contents is not ©2025 Traxon Technologies Europe GmbH permitted. All rights reserved Downloads and more information at: Traxon Technologies Europe GmbH www.ecue.com...
  • Page 2 Test mode via Web interface Firmware Update Dismounting Certifications Dimensions 12.1 About the SYMPL essential2 Node 12.2 Protocols 12.3 System 12.4 Power supply 12.5 Network 12.6 Update WWW.TRAXON-ECUE.COM ©2025 traxon technologies. All rights reserved. Information for Use 20252409 Sheet: 2 / 2...

  • Page 3: Safety Instructions

    The SYMPL essential2 Node is powered by an external power supply or via Power- over-Ethernet (PoE). It is easily mounted on standard 35 mm DIN rails, or via WWW.TRAXON-ECUE.COM ©2025 traxon technologies. All rights reserved. Information for Use 20252409 Sheet: 1 / 18...
  • Page 4 Ethernet-Port 1 x e:net 10/100 Mbit/s, RJ45 LEDs for Ethernet activity, device status, DMX status, error; User interfaces WWW.TRAXON-ECUE.COM ©2025 traxon technologies. All rights reserved. Information for Use 20252409 Sheet: 2 / 18 Identify button; Test button;...
  • Page 5 LED Test / Error LED Status Power supply (V +, V –, „4.5 Power supply“ on page 8 GND left to right) „4.6 Grounding“ on page 9 WWW.TRAXON-ECUE.COM ©2025 traxon technologies. All rights reserved. Information for Use 20252409 Sheet: 3 / 18...
  • Page 6 Keep the Identify button pressed while powering up, Status and Test / Error LEDs light up at first. Bootloader mode is signaled by a fast blinking Status LED. WWW.TRAXON-ECUE.COM ©2025 traxon technologies. All rights reserved. Information for Use 20252409 Sheet: 4 / 18...

  • Page 7: General Remarks

    (ESD protection). — Do not try to repair the device. Return it to your Traxon e:cue distributor for replacement or repair. WWW.TRAXON-ECUE.COM ©2025 traxon technologies. All rights reserved. Information for Use 20252409 Sheet: 5 / 18...
  • Page 8 Traxon strongly recommends to comply with security advisories on the latest security threats, patches and other related measures. WWW.TRAXON-ECUE.COM ©2025 traxon technologies. All rights reserved. Information for Use 20252409 Sheet: 6 / 18...

  • Page 9: Installation

    Never connect more than one SYMPL Node in factory state to a network. The identical IP addresses will conflict and disturb proper communication. — Ethernet cable must be shielded. WWW.TRAXON-ECUE.COM ©2025 traxon technologies. All rights reserved. Information for Use 20252409 Sheet: 7 / 18...
  • Page 10 To connect the device to a power supply unit, use the provided 3-pin terminal plug and lay the wires as stated on the front label. WWW.TRAXON-ECUE.COM ©2025 traxon technologies. All rights reserved. Information for Use 20252409 Sheet: 8 / 18...
  • Page 11 – – DMX 1 DMX 2 DMX 3 DMX 4 DMX 5 DMX 6 DMX 7 DMX 8 SYMPL essential2 Node SUPPLY e:net + – WWW.TRAXON-ECUE.COM ©2025 traxon technologies. All rights reserved. Information for Use 20252409 Sheet: 9 / 18...

  • Page 12: Network Configuration

    The network configuration of the SYMPL essential2 Node is completed. Network configuration with the web interface Open a common web browser on a connected PC. Enter the SYMPL essential2 Node’s IP address into the address bar: e.g. http://192.168.123.1 WWW.TRAXON-ECUE.COM ©2025 traxon technologies. All rights reserved. Information for Use 20252409 Sheet: 10 / 18...
  • Page 13 You can change the login password to the SYMPL essential2 Node's configuration page and the device name of the SYMPL essential2 Node at “Settings” page. Do not forget the new password. WWW.TRAXON-ECUE.COM ©2025 traxon technologies. All rights reserved. Information for Use 20252409 Sheet: 11 / 18...

  • Page 14: Test Mode

    DMX port 2: All channels blink. DMX port 3: All channels blink. DMX port 4: All channels blink. DMX port 5: All channels blink. DMX port 6: All channels blink. WWW.TRAXON-ECUE.COM ©2025 traxon technologies. All rights reserved. Information for Use 20252409 Sheet: 12 / 18...
  • Page 15 Delay between steps. Manual: Press the Test button to move the block. Define the first channel at “Start Address”. Click “set” to run the test and to apply changes in the test settings. WWW.TRAXON-ECUE.COM ©2025 traxon technologies. All rights reserved. Information for Use 20252409 Sheet: 13 / 18...

  • Page 16: Firmware Update

    Disconnect all attached cables. Dismount the e:cue SYMPL essential2 Node from the content rail by pulling the black DIN rail handle and unhitching the SYMPL essential2 Node. The dismounting is completed. 10 Certifications WWW.TRAXON-ECUE.COM ©2025 traxon technologies. All rights reserved. Information for Use 20252409 Sheet: 14 / 18...
  • Page 17 Does the device support DMX? Yes. The SYMPL essential2 Node supports DMX. Does the device support RDM? No. The SYMPL essential2 Node supports one-directional communication only. WWW.TRAXON-ECUE.COM ©2025 traxon technologies. All rights reserved. Information for Use 20252409 Sheet: 15 / 18...
  • Page 18 Yes. You can integrate multiple SYMPL essential2 Nodes in your installation. As part of the e:cue SYMPL family, you can also combine it with the whole SYMPL range of interfaces. WWW.TRAXON-ECUE.COM ©2025 traxon technologies. All rights reserved. Information for Use 20252409 Sheet: 16 / 18...
  • Page 19 You can find the latest firmware versions either on www.ecue.com. Or you will get a notification in SYMPHOLIGHT when an update is available. For more information see „8 Firmware Update“ on page WWW.TRAXON-ECUE.COM ©2025 traxon technologies. All rights reserved. Information for Use 20252409 Sheet: 17 / 18...
  • Page 20 SYMPL essential2 Node — Information for Use  content Please check for the latest updates and changes on the Traxon website. © 2025 TRAXON TECHNOLOGIES. ALL RIGHTS RESERVED. www.traxon-ecue.com...

Table of Contents