Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Stenograph NexGen Keyboard Tray
- Page 1 Keyboard Tray with Keyboard Attached Keyboard Tray Keyboard NOT included.
- Page 2 Turn the right hand screw counter-clockwise until it stops. DO NOT FORCE. Keyboard Tray Turn the left hand screw counter-clockwise until it stops. DO NOT FORCE.
- Page 3 Peel away the liner from each of the 4 mounting pads. Take care to remove the “liner” only. Each pad has 2 parts a “hook” side and a “loop” side.
- Page 4 With the liners removed hold your keyboard ABOVE the tray in the position you The VELCRO “loop” side of the pads will be transferred to the backside of the want to have it located. Slowly lower the keyboard onto the adhesive pads. keyboard.
- Page 5 Retention Retention Screw Screw With the liners removed hold your keyboard above the tray in the position you The VELCRO “loop” side of the pads will be transferred to the backside of the want to have it located. Slowly lower the keyboard onto the adhesive pads. keyboard.
- Page 6 Right side retention screw. With the tray mounted on the LCD frame as shown turn each retention screw clock-wise, equal amounts to keep the tray centered. Turn the screws until the tray is firmly held in place. Left side retention screw. Note: since screws are facing each other the LH turn will be opposing the RH turn.
- Page 7 You have now successfully installed the keyboard tray...
Need help?
Do you have a question about the NexGen Keyboard Tray and is the answer not in the manual?
Questions and answers