Summary of Contents for Protex GymPro Eco-Roll Floor Cover System
- Page 1 Thank you for your Purchase! Enclosed, please find the instruction manuals needed to get started with your new system. WWW.PROTEXMATTING.COM...
-
Page 2: Getting Started
Getting Started We sincerely thank you for the purchase of your new Gym Floor Cover System. Below is guide to getting started. We hope you enjoy the protection for many years to come. NOTE: Pre-Deployment Maintenance Before using your Gym Floor Cover System, the gym floor must be properly cleaned to avoid unnecessary damage to the floor surface caused by loose dirt and debris. -
Page 3: Parts List
Rack Assembly Instructions * TOOLS REQUIRED FOR ASSEMBLY* **NOTICE: Two People are required to SAFELY 3/4" Wrench and/or Socket Set assemble the Racking System** Rubber Mallet (may be required to tap bolts into holes) PARTS LIST 1) "A" Frame Assembly Qty:(2) 2) (Black) Core and Bearing Assembly Qty:(2) - Page 4 LAY-UP RACK ASSEMBLY INSTRUCTIONS 1) LOOSELY ATTACH TOP SQUARE CROSS BAR TO THE "A" FRAME WITH THE LOCKING SWIVEL CASTERS. 2) LOOSELY ATTACH THE OTHER END OF THE SQUARE CROSS BAR TO THE FIXED CASTERS. 3) LOOSELY ATTACH BOTH LOWER SQUARE CROSS BARS TO EACH "A" FRAME . 4) LOOSELY ATTACH THE LOWER CORE ROLLER BAR BEARINGS TO THE "A"...
- Page 5 EZ‐ROLL SYSTEM WINDING INSTRUCTIONS The above diagram shows you how the material is routed through the EZ‐=ROLL WINDING SYSTEM. Step 1) Lock the casters Step 2) Pull the material under the bo om Straightening Bar as shown. Make sure the material is cen- tered between the core spindles. Step 3) Pull the material up and over the top Straightening Bar as shown. Step 4) Pull the material to the core that you are currently loading. Note: Always load the bo om core first. Tip: When winding up the material, do not tug the product back and forth a er is has touched the bo om Straightening Bar as this will add slack to the rolls on the core. If some adjustment is need‐ ed, simply push or pull the material as needed, before it touches the bo om spindle. ...
-
Page 6: Periodic Maintenance
Cleaning and Maintenance Recommendations Cleaning & Maintenance Recommendations The following cleaning & maintenance instructions are recommended to ensure the product maintains its desired ap-pearance and an optimal performance level, as well as ensuring a long product life span. Daily Cleaning •...
Need help?
Do you have a question about the GymPro Eco-Roll Floor Cover System and is the answer not in the manual?
Questions and answers