Summary of Contents for TOLSEN TOOLS FORCE XPRESS 79533
- Page 1 79533 MARBLE CUTTER INSTRUCTION MANUAL 1450W 220-240V~50/60Hz SAVE THIS MANUAL ! You will need this manual for safety instructions, operating procedures and warranty. Put it and the original sales receipt in a safe dry place for future reference.
-
Page 2: Important Safety Information
SAFETY IMPORTANT SAFETY INFORMATION WARNING: read all safety warnings and instructions.Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.Save all warnings and instructions for future reference.The term ”power tool” in the warnings refers to your mains-operated (corded) power tool. Work area safety a) Keep work area clean and well lit. - Page 3 SAFETY Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off.
- Page 4 SAFETY 9. Hold your tool by the handle when working. Do not operate the tool on surfaces under which there might be electrical wires, and water or gas pipes. The contact with electrical wires or water might cause electrical shocks. The electric motor generates sparks that, if in contact with flammable gases, might cause explosion; 10.
-
Page 5: Product Description And Specifications
SPECIFICATIONS PRODUCT DESCRIPTION AND SPECIFICATIONS Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.While reading the operating instructions, unfold the graphics page for the machine and leave it open. Intended Use This tool was designed for light professional use. - Page 6 SETUP OPERATING INSTRUCTIONS Assembly and Operation 1. Before plugging your tool into the power outlet, check if the local power supply and your tool have the same voltage. Check if the tool is in good conditions by performing a quick visual inspection. If any abnormality is found, immediately suspend the use and contact the nearest authorized dealer for repair.
-
Page 7: Motor Brushes
SETUP Motor brushes Make sure the tool is unplugged from the power outlet and the blade is stopped! 1. Remove the cover of the access port to the motor brushes and check the brushes regularly. Replace the motor brushes when they are 6mm or shorter. 2. -
Page 8: Cleaning And Maintenence
CLEANING AND MAINTENENCE CLEANING AND MAINTENENCE Before performing any cleaning or maintenance, unplug the tool from the power grid; A er use, clean the tool with a damp cloth (do not pour water on the tool) and store it in a clean, dry place protected from moisture and dust. - Page 9 SUZHOU TOLSEN TOOLS CO.,LTD. www.tolsentools.com TOLSEN is a trademark or registered trademark of TOLSEN TOOLS. All rights reserved. TolsenWorld SCAN TO VISIT MADE IN CHINA PRODUCT LINK...
Need help?
Do you have a question about the FORCE XPRESS 79533 and is the answer not in the manual?
Questions and answers