Download Print this page

Fast Metal ZANT Instructions

Eyewear

Download this manual

Please use the following instructions

to install and remove your bungee

cord straps. Scan the QR code for full

instructions to your eyewear.

WEARING OVER OR UNDER HELMET – STRAP ADJUSTMENT

To tighten the head strap, pull the strings through the

Velcro tab to desired length, equally adjusting until the

eyewear fits comfortably and snugly against your face. Tie

a knot in each string to keep in place. Cutting the excess

string is optional.

BUNGEE CORD REMOVAL

REV3238A_0125_Fast Metal Zant APEL Instructions.indd 1

ZANT EYEWEAR

INSTRUCTIONS

PUSH

BUNGEE CORD

TOWARDS LENS

TO LOOSEN LOOP

PULL

LOOP OPEN AND

SLIDE BUNGEE

CORD THROUGH

PULL

LOOP THROUGH

SLOT IN LENS

REV3238A_0125

2/5/2025 5:01:20 PM

Need help?

Do you have a question about the ZANT and is the answer not in the manual?

Page 1 TO LOOSEN LOOP PULL LOOP OPEN AND SLIDE BUNGEE CORD THROUGH PULL LOOP THROUGH SLOT IN LENS ©2025 FAST METAL. ALL RIGHTS RESERVED. REV3238A_0125 REV3238A_0125_Fast Metal Zant APEL Instructions.indd 1 REV3238A_0125_Fast Metal Zant APEL Instructions.indd 1 2/5/2025 5:01:20 PM 2/5/2025 5:01:20 PM...
Page 2 EDGE OF LENS CARE, CLEANING & MAINTENANCE The lenses in your Zant Eyewear System have fog- and scratch- resistant coatings. To extend the life of the lens surfaces, clean and store your eyewear away from direct sunlight and at room temperature when not in use.