AHD Mobile DVR User Manual Catalogue Chapter 1 Overview........................1 Chapter 2 Quick setup........................1 1.Device Installation......................1 2. User Login..........................1 3.Set up the System time....................2 4.Set up cameras........................2 5.Wizard...........................3 5.1 Vehicle Information setup..................3 5.2 DiskManagement....................... 4 5.3 3G/4G Setup........................
Page 3
AHD Mobile DVR User Manual 5.3.1 UART-TTS....................... 17 5.3.2 UART-Serial Net (Pass Through)..............17 5.4 Reverse Camera.......................18 5.5 NetTextShow......................19 6.Device Maintenance....................... 19 6.1 Log Inquiry........................ 20 6.2 Disk Management....................20 6.3 Related with the Parameter...................20 6.4 System upgrading....................21 7.Alarm setting........................
AHD Mobile DVR User Manual Chapter 1 Overview MR9704C is a DVR designed for Analog HD vehicle monitoring. With built-in high performance image processor and advanced H.264 video compression technology, it provides AHD video recording, storage and playback solution. It has built-in 3G/4G/WiFi module (optional) for remote monitoring, analysis and management.
AHD Mobile DVR User Manual Figure 1. System Menu “Menu” is the primary menu of the system setup and control, see as following: Figure 2. Primary Menu 3.Set up the System time Path: Basic->DateTime, see as following: Figure 3. System date and time TimeSYNC: Date and Time can be synchronized with GPS/BD 4.Set up cameras Path: Menu->Record->Mode.
AHD Mobile DVR User Manual general and AHD cameras, please select the second Type. See as following: Figure 4. Recording setting Figure 5. SignalType setup PS: If your cameras don’t display image on the monitor, please check this setup. 5.Wizard Path: Menu->Wizard.
AHD Mobile DVR User Manual Figure 6. Vehicle information setup The DVR is using “Device ID” to connect with the server, so please input the correct DeviceID which was registered on the server for your device. The user can modify the VehicleName and PlateNumber according to their requirement.
AHD Mobile DVR User Manual Figure 9. WIFI setting list 5.5 Server setting IP (or Domain) is your server’s IP (or Domain), the Port should be same with your server setup. Figure 10. Wizard-Server setting 5.6 NetState Path: Menu->Network->NetState. You can check the state of the network connection of your device here.
AHD Mobile DVR User Manual Chapter 3 System Menu Figure 12. System menu 1.1 Video Playback The device supports one channel video playback, Select “Playback” in the System menu, then you will get the video searching interface, please search the video according to your requirement.
AHD Mobile DVR User Manual Figure 14. Video Backup You can backup the video with an USB drive. There are two backup modes: “Normal backup” and “Event backup” Figure 15. Video file list Select the video file which you want to backup and then click “Backup”, remove your mouse and insert your USB drive, then the backup will start.
AHD Mobile DVR User Manual Time synchronization: The system's date and time can be synchronized with GPS/BD. 2.2 Vehicle Information Figure 18. Vehicle Information Device ID: It is the ID used to connect your device with the server. It should be the same ID which you registered your device on the server.
AHD Mobile DVR User Manual 2.4 Video Output Figure 21. Video Output 2.5 On/Off setting On/Off “Ctrl” setting is for starting on and shutting down the device automatically WHEN THE DEVICE IS ON STANDBY AFTER ACC IGNITION OFF. You can set up three time segments.
AHD Mobile DVR User Manual Figure 23. On/Off Voltage setting 2.6 System setup Figure 24. System Setup 2.7 System Information System information includes: Device Model, Serial Number, Hardware & Firmware version etc. 3.Network setup Network setup: This interface is used to set up the necessary parameters to connect the device with the server ~ 10 ~...
AHD Mobile DVR User Manual Figure 25. Network Setup 3.1 Server setup IP/Domain is the WAN static ip or domain of your device’s server. Figure 26. Server setup 3.2 3G/4G Setup The device will detect the 3G/4G ModuleType automatically. Please insert the right SIM card which corresponding with the ModuleType detected.
AHD Mobile DVR User Manual 3.3 WIFI setting The device can save maximum 6 WiFi ESSID (Access Points). It will search, match, connect, and switch automatically. Click the corresponding blank to start WiFi setup. Then click “Search” you will see the available WiFi around your area, select the one your want to connect and input the password and save it.
AHD Mobile DVR User Manual 4.1 Recording Mode setting Figure 30. Recording Mode setting Please set up your cameras’ SignalType, Valid/Invalid. The DVR works with both AHD and general cameras. If you use AHD cameras, please select the first Type, if you use general cameras, please select the third Type, if you use both of general and AHD cameras, please select the second Type.
AHD Mobile DVR User Manual Bit is adjustable between 1024Kbps-4096Kbps (6 classes image quality). 4.3 Sub Stream SubStream is used for network transmission and backup in local disk Figure 33. Sub Stream setting Figure 34. SubStream AV setting If you use 4G network, you can set up the resolution to be D1, so you can get better effect when you viewing the live video remotely on PC or cell phone.
AHD Mobile DVR User Manual 4.5 Recording OSD (On Screen Display) You can set up the information you want to be recorded in the video. Figure 36. Recording OSD 4.6 Image setting Image setup is used to adjust to camera’s image effect, please set up it carefully. Figure 37.
AHD Mobile DVR User Manual Figure 38. Mirror setting 5.Advanced setting This interface is used for UserManagement, Driving Habits monitoring, UART port setting, Temperature Sensor, Reverse Lines setting, displaying the text received from the server. Figure 39. Advanced setting 5.1 User Management You can add, modify, delete users, and modify the login username and privileges.
AHD Mobile DVR User Manual Figure 41. Driving Habits monitoring 5.3 UART setting This device has 1 UART port (TTL). You can connect some peripheral devices such as TTS (Text To Speech), Network Pass Through etc with the DVR vai our UART convertor. Figure 42.
AHD Mobile DVR User Manual Select “SerialNet” ( PassThrough ) in the drop-down box of “Function”. Config the parameters as per the picture followed: Figure 44. UART setting 5.4 Reverse Camera The DVR comes with Reverse camera function. Any channel can be used as reverse camera, click “Zone”...
AHD Mobile DVR User Manual 5.5 NetTextShow The device can display and broadcast the text received from the server. (If you want broadcast the text, you need to connect TTS device with the DVR.) Figure 47. NetTextShow You can set up the display time duration of the text. Figure 48.
AHD Mobile DVR User Manual 6.1 Log Inquiry Inquiry the system’s running log according to the required Log Type and Time Range. Figure 50. Log inquiry The log will record the device’s exception, local operation, system on/off, alarm information etc. 6.2 Disk Management You can check the status of the disk here.
AHD Mobile DVR User Manual Figure 52. Import/Export PLEASE USE THE RESTORE FUNCTION CAREFULLY TO AVOID THE LOST OF YOUR IMPORTANT DATA 6.4 System upgrading Please format your USB disk as FAT32 type and copy the upgrading file to the root directory of the USB disk.
AHD Mobile DVR User Manual 7.Alarm setting Alarm setup interface includes the setting related to all alarm types, such as I/O alarm, Video Loss, Fatigue Driving, Over Speed, Disk error. Figure 54. Alarm setting 7.1 Input Alarm The device has 4 alarm inputs, 2, 4 are positive trigger, 1, 3 are positive/negative trigger (optional) Figure 55.
AHD Mobile DVR User Manual Figure 56. Input Alarm setting There are three input modes: high level, low level and open. For positive trigger, the normal trigger level is high, but if the reversed logic is enabled, the trigger level is changed to low level and open.
AHD Mobile DVR User Manual 7.3 Video Loss Video Loss alarm will be triggered if there is no camera or wrong type camera were connected with a valid channel. Figure 59. Video Loss alarm setting 7.4 Fatigue Driving Alarm The Fatigue Driving time is calculated since the device was started. In this interface you can set up the fatigue driving time, to remind the driver to avoid fatigue driving.
AHD Mobile DVR User Manual 7.6 DiskError You can set up alarm when there is Disk Error detected by the device Figure 62. Disk Error setting Chapter 4 Installation Warnings For safely using and long service life, please respect these Warnings when insalling and using the device: 1.
Need help?
Do you have a question about the MR9704C and is the answer not in the manual?
Questions and answers