Jool baby Quick Flip Assembly Instructions

Reinstalling and removing
the potty seat
Position potty seat (B) at a 45-degree
angle between the lid and the adult seat.
While pressing down on the adult seat near the
hinge, pull potty seat (B) at an angle to detach.
CHOKING HAZARD:
• Keep small parts away from children
during assembly and disassembly
• Ensure mounting covers are installed
properly and check regularly to ensure
they have not loosened.
FALL HAZARD:
• Adult supervision required. DO NOT allow
child to use the product unattended.
• Always ensure assembly has not
loosened or become damaged before
each use.
ENTRAPMENT HAZARD:
• DO NOT allow child to place potty seat on or
over their head.
• Store potty seat in a safe place out of the
reach of children
Raise the lid of the toilet seat and
while holding the potty seat (B) at a
45 degree angle, push it at an angle onto
the hinge until an audible click is heard.
IMPORTANT:
1. KEEP INSTRUCTIONS for future use.
Adult assembly required.
2. Wash and inspect before use. Discard
and replace at first sign of weakness
or damage.
3. To prevent damage, DO NOT USE potty
seat for children over 60 lbs (27.2kg).
Remove, clean and store away from
light and heat. Always inspect before
reinstallation.
To Clean: Wipe surfaces with soap and
water or mild cleaning detergent.
Maintenance: Check for loosening and
tighten fasteners as needed.
Storage: Remove, clean and store away
from light and heat. Always
inspect before reinstallation.
PTY-2081-LNG
MANUFACTURER:
JOOL PRODUCTS LLC
PO Box 1273
LAKEWOOD, NJ 08701
1-888-788-JOOL (5665)
MADE IN CHINA
Quick
Flip
Assembly
Instructions
Elongated