Page 1
Manuale utente - Prodotto 1: Einhell GC-CT 18/24 Li (1x2,0Ah) Tagliabordi a batteria Power X-Change (18 V, 2,0 Ah, Li-Ion, taglio 24 cm, 20 lame taglio incluse, incl. una batteria da 2,0 Ah e un caricabatteria)
Page 3
- VOL + - VOL + 1. 45 rpm adaptor 2. Turntable 3. Spindle 4. Earplug jack RCA to AUX cable (included) 5. Bluetooth pair button 6. - vol + knob 7. Stylus 8. Tone arm 9. 33/45/78 rpm speed selector 10.
Page 4
WHAT’S IN THE BOX NOTE: Never put on the headphone till you have plugged in the headphone plug and turn down the volume level. Turntable, platter mat, RCA to AUX cable, USB cable, AC power cord. USING THE 45 RPM ADAPTOR USING THE TURNTABLE The 45 RPM adaptor allows you to play 45 RPM records: Plug the supplied power cord into the AC power socket on the back of...
Keep dry – DO NOT product; or any other conditions whatsoever that are beyond the control of JAM. This guarantee is effective only if the product is purchased and operate in wet or moist conditions. operated in the UK / EU. A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was •...
Page 6
Eris -series E3.5/E3.5 BT/E4.5/ E4.5 BT ® High-Definition Media Reference Monitors Owner’s Manual ® English www.presonus.com...
Overview Eris®-series E3.5/E3.5 BT/E4.5/ E4.5 BT Introduction Owner’s Manual Overview Introduction Thank you for purchasing a pair of PreSonus® Eris® high-definition media reference monitors. Ideal for gaming, home content creation, or just listening to your favorite album, Eris media reference monitors deliver studio-quality sound, with a smooth and accurate frequency response.
Connections and Controls Eris®-series E3.5/E3.5 BT/E4.5/ E4.5 BT Rear Panel Owner’s Manual Connections and Controls Each Eris media reference monitor pair consists of one active speaker and one passive speaker. Nearly every connection is located exclusively on the active speaker. This speaker provides signal and power for the passive speaker.
Connections and Controls Eris®-series E3.5/E3.5 BT/E4.5/ E4.5 BT Active Speaker Front Panel Owner’s Manual Speaker Connections 2.1.4 Active Speaker Passive Speaker Bare-wire connectors. This connection is used to send power and send signal to the passive Eris speaker. Be sure to connect the positive and negative connections on your active Eris speaker to the positive and negative connections, respectively, on the passive Eris speaker (i.e.
Hookup Diagrams Eris®-series E3.5/E3.5 BT/E4.5/ E4.5 BT Bluetooth Pairing (Eris E3.5 BT and Eris E4.5 BT only) Owner’s Manual Bluetooth Pairing (Eris E3.5 BT and Eris E4.5 BT only) Your Eris E3.5 BT or E4.5 BT can be paired with any Bluetooth device for audio playback.
Resources Eris®-series E3.5/E3.5 BT/E4.5/ E4.5 BT Troubleshooting Owner’s Manual Troubleshooting No power. First ensure that your active Eris speaker is plugged in. If it’s connected to a power conditioner, verify that the power conditioner is turned on and functioning. No audio. If your active Eris speaker appears to power on but you hear no sound when playing audio from your audio source (the lights are on but nobody’s home), first make sure that the cable connecting your audio source to the active speaker is working correctly.
Page 16
Dinner is Served Added bonus: PreSonus’ previously Top Secret recipe for… Chicken and Andouille Gumbo Ingredients: • 1 C All-Purpose flour • ¾ C Vegetable Oil • 1 large onion (diced) • 1 small onion (quartered) • 6 celery stalks (diced) •...
Page 17
Eris -series E3.5/E3.5 BT/E4.5/ E4.5 BT ® High-Definition Media Reference Monitors Owner’s Manual 18011 Grand Bay Ct. • Baton Rouge, ® Louisiana 70809 USA• 1-225-216-7887 Part# 70-52000143-A www.presonus.com...
Need help?
Do you have a question about the HX-TT400WD and is the answer not in the manual?
Questions and answers