Advertisement
Advertisement
Table of Contents
Related Manuals for Optex CamPower LI4000
Summary of Contents for Optex CamPower LI4000
- Page 1 OPTEX CamPower LI4000 High Speed LiIon Universal Battery Charger Instruction Manual...
- Page 2 With Spring Expanded Features Congratulations on purchasing your new OPTEX CamPower LI4000 High Speed LiIon Universal Battery Charger. The charger which includes 5 adaptor plates plus the base of the charger for optimum battery compatibility makes this charger the most versatile compatible LiIon battery charger on the market today.
- Page 3 This versatile High Speed charger also includes an ultra compact AC Adaptor with worldwide voltage (100 to 240 Volts AC), and a DC card for in-vehicle (12 Volt DC) charging, making this the perfect charger for travel. Suitable for most Li-ion digital camera and camcorder battery packs via the exchangeable adaptor plates. Suitable for 3.6V and 7.2V Li-ion battery packs.
-
Page 4: Battery Indicator
BATTERY INDICATOR (2) A running bar indicates battery pack is properly connected to the charger and is being monitored for voltage and possible fault. Other indicators in the LCD panel may turn on as well as during the monitoring phase - this is normal. Charge Indicator (3) Flashing on and off indicates the battery is being charged. -
Page 5: Fault Indicator
FAULT INDICATOR (7) If you see the ERROR display symbol flashing, there may be a fault in the battery being charged, or the protection mode has been triggered due to improper operation (short circuit, reverse polarity etc.). There may be a problem with your battery. ATTENTION Connect ONLY rechargeable Li-ion battery packs with the dedicated charging adaptor plate. - Page 6 Plate A ready to be Plate A installed Plate B installed pressed into place Plate C ready to be Plate C Installed Plate E installed pressed into place Note: Plate C will over hang the charger base slightly at the top. Make sure that you align the tab on the plate with the top of the charger.
- Page 7 Once the correct plate is installed (if needed) the next step is to determine how to fit your battery pack into the charger. First note the guide rails on the battery. Next find the metal contacts on the battery. Now find the point on the charger plate or base where the guides and metal tabs will line up on both the charger and battery.
- Page 8 Once you have lined up the guides and the contacts, you can slide the battery forward to lock it into place. You should hear a click which indicates that the battery is securely locked into place. Once the battery pack is connected properly the charging process begins and the charge indicator will flash.
- Page 9 PLATE E INSTRUCTIONS *The Plate E label lists only a small portion of batteries that are compatible with this charger plate. Please refer to the Battery Compatibility List for the entire make/model list of compatible batteries. Note: When inserting your battery to the correct position for charging, you may need to apply pressure and pull down to open the spring loaded slide tray (see below pictures for reference).
- Page 10 VW-VBA05, VW-VBA10 PENTAX: D-L12, D-L17, D-L18 RICOH: DB-40, DB-43 SANYO: DB-L10 TOSHIBA: PDR-BT2, PDR-BT3 For: KONICA: DR-LB1 KYOCERA: BP-800S, BP-1000S POLAROID: PR111DG, PR110DG SHARP: AD-S30BT, AD-S31BT, AD-T50BT, AD-T51BT SONY: LIP-4WM TOSHIBA: PDR-BT1, PDR-BT9 For: FUJI: NP-80, NP1-00 JVC: BN-V101 KODAK: KLIC-3000 PANASONIC: VW-VBP10...
- Page 11 For: CANON: NB-4L PANASONIC: DMW-BCC12 RICHO: DB-60...
Need help?
Do you have a question about the CamPower LI4000 and is the answer not in the manual?
Questions and answers