Related Manuals for KMC Controls IG425GR01-LH
Summary of Contents for KMC Controls IG425GR01-LH
- Page 1 GALVANIZED STEEL DOUBLE TOP GAZEBO IG425GR01-LH Reach us at： service@kmcgloble-us.com (+1) 559-354-1889...
- Page 2 part 1: Precautions and preparations 7-14 part 2: Material list (please check before installation) 15-23 part 3 24-31 part 4 32-47 part 5 48-53 part 6 part 7...
- Page 4 1. Two or more people are required for assembly. 2. A ladder and electric drill may be necessary. 3. Do not erect the structure in heavy winds or inclement weather. 4. Do not use candles, matches, or any open ames near the tent. 5.
- Page 5 In case of windy weather, please do not stand in the gazebo. Please do not stand under the gazebo in case of heavy snowfall. For safety, please use expansion screws to reinforce the posts to the ground. In windy weather, please tighten the fence and netting to avoid tearing in high winds. In extreme weather conditions, you can use a rope to pull the four corners of the gazebo to keep it stable.
-
Page 6: Installation Precautions
EQUIPMENT REQUIREED(Not included in boxes) *NOTE:Tools / equipment are not shown to actual size and scale. LEVEL PHILLIPS SCREW RUBBER MALLET DRILL ALLEN KEY EQUIPMENT REQUIREED(Not included in boxes) *NOTE:Equipment are not shown to actual size and scale. STEPLADDER SAFETY HAT GLOVES SAFETY GOGGLES (6.5Ft Or More) -
Page 7: Part 2: Material List
Part 2: Material list (please check before installation) Hardware list Parts list P9-P14... - Page 8 In case you cannot nd or lose some small parts or screws during installation, we have provided extra parts ‘1’ ‘3’ ‘4’ ‘8’ ‘10’ ‘U’ ‘Y’ ‘Y1’，it is a bag with ”Additional Parts“ label. M6x135mm M6x16mm M5x12mm M6x25mm ST4.8x12mm M6x10mm M6x15mm 10x50mm...
- Page 9 PARTS Inside the part"A"...
- Page 10 PARTS...
- Page 11 PARTS...
- Page 12 PARTS...
- Page 13 PARTS...
- Page 15 Part 3...
- Page 16 Note the orientation of the “22”, the single hole part faces inwards.
- Page 17 When connecting B1/B via P , make sure that 3 holes on part P (as shown in the picture) should be facing upwards. Do not install it upside down.
- Page 18 When connecting B2/B3 via P , make sure that 3 holes on part P (as shown in the picture) should be facing upwards. Do not install it upside down.
- Page 23 When sliding hook 7 x U onto each rail of parts B and B1, they should face inwardThe same for sliding hook 8 x U on rails of parts B2 and B3.
- Page 24 Part 4...
- Page 30 Stick Y and Y1 on this side...
- Page 32 Part 5...
- Page 33 Attach Z and Zl by lightly tapping with a screwdriver.
- Page 34 Attach Z and Zl by lightly tapping with a screwdriver.
- Page 36 When installing this step, do not tighten the screws to facilitate later installation.
- Page 37 tighten the screws tighten the screws...
- Page 39 obverse side: reverse side: obverse side: reverse side:...
- Page 42 Steps 24,25,26 and 27 need to be synchronized Need to align the holes Y and B/B1.
- Page 43 Steps 24,25,26 and 27 need to be synchronized Need to align the holes Y and B2/B3.
- Page 47 First remove screw No. ①...
- Page 48 Part 6...
- Page 49 1（4pcs） Steps 31 and 32 need to be synchronized. The other part has 8 holes One part of the The other part hanging on curtain has 7 has 8 holes Part B3. holes hanging hanging on on Part B1. Part B2. One part of the curtain has 7 holes hanging...
- Page 50 Steps 31 and 32 need to be synchronized.
- Page 51 1(4pcs) Steps 33 and 34 need to be synchronized. The other part has 8 holes One part of the The other part hanging on curtain has 7 has 8 holes Part B3. holes hanging hanging on on Part B1. Part B2. One part of the curtain has 7 holes hanging...
- Page 52 Steps 33 and 34 need to be synchronized.
- Page 54 if you have any issues with your item please let us know! We will always do our best to comeup with a solution that you will be happy with.Please get in touch with our customer service team before returning the product.And pls do not throw the original box(es) if you have not nished assembling or con rmedno qualityissues. Length of return period: Items can be returned within 30 days of purchase.
Need help?
Do you have a question about the IG425GR01-LH and is the answer not in the manual?
Questions and answers