RHINOVATOR 120L Contents: Overview................Applications................ Safety Instructions............... Power Requirements............Installation: Before Connecting The Power Supply.... Operating The Rhinovator Forced Action Mixer....Cleaning................Transport................Maintenance................ Machine Features And Youtube Tutorials Link....Technical Data..............Troubleshooting..............Spare Parts List..............Spare Parts Overview Diagram...........
OVERVIEW: The Patent pending Rhinovator is different from any other forced action mixer on the market in that its drum and chute are made from Polypropylene instead of steel, giving it the unique property of being able to resist a permanent bond with resin based materials. As such, it must be treated differently to other conventional forced action mixers.
POWER REQUIREMENTS: The Rhinovator must be connected to a 5kVA intermittent transformer (2.5kVA continuous) or equivalent generator. For optimum running, the transformer should be connected to the mains, and a 32amp lead should run from the transformer to the mixer. Use only approved and certified power cables and plugs.
• Remove the drive shaft spindle cover and either clean or dispose of it. • If using resin products, spray Rhino ‘drum cleaner’ to the inside of the drum and chute and wipe all surface areas clean with a cloth. The drum should be cleaned at the end of the installation or every ten mixes –...
TRANSPORT: The Rhinovator weighs 95kg. Minimum two person lift when loading onto vehicles. Use marked lifting points TRANSPORT (when moving): Grip the lifting points between the loading wheels (fig. A pictured) and tip the machine back on its transport wheels. Push the machine forward to manoeuvre. TRANSPORT (when loading): The mixer lid should be closed and the machine should be placed on all four wheels and secured to avoid movement during transport.
MAINTENANCE: It is good practice to remove the mixing head and chute exit door at the end of each install. The following components are considered critical for the continued use of the machine during on- site operation, and the associated inspection frequencies are specified below. Component Check Inspection Frequency...
10) Four mixing arms with fully adjustable shovels for faster, more consistent mixing. 11) Cable housing - no more trailing cables. 12) Rhino shield - motor protection cover. 13) Multi-tooth bag splitter. 14) Handy tool caddy. The only forced action mixer which has been 100% designed by installers for use by installers.
TECHNICAL DATA: 230V110V 50HZ (Geared output 2KW) Motor: 116cm/69cm/92cm H/W/D: 120 Litres Mixing Capacity: 95kg Weight (empty): <68 dB when empty Noise: TROUBLESHOOTING: Symptom Possible Cause My forced action mixer Check power is on. Check all cables for defects (with power off). won’t start.
Unit 141, Leyland Trading Estate, Wellingborough, NN8 1RT Tel: 01933 276998 Email: info@rhinovating.co.uk Website: www.rhinomixer.com YouTube: Rhino Surfaces WARRANTY: The Rhinovator comes with a 12-month limited warranty. • This warranty covers any defects in material or workmanship under normal use during the warranty period.
Page 16
RHINOVATOR 120L Forced action mixer USER MANUAL SALES /CUSTOMER SUPPORT: Rhinovating Ltd. Unit 141, Leyland Trading Estate. Wellingborough. NN8 1RT Tel: 01933 276998 Email: info@rhinovating.co.uk Website: www.rhinomixer.com YouTube: Rhino Surfaces TECHNICAL SUPPORT/SERVICE For service and technical support, please contact our service partners: Shawbank Service Centre Ltd.
Need help?
Do you have a question about the RHINOVATOR 120L and is the answer not in the manual?
Questions and answers