Page 1
Ablaze Mirrors Lit Magnifying Mirror Range Installation Guide Please read these instructions carefully and in full before installation. Hardwire installation should be carried out by a qualified electrician.
Round Mirror Installation Installation: Begin by determining the appropriate location and height. We recommend approximately 150cm from the floor if the mirror is to be used while standing, and 120cm from the floor if used while seated. Remove the unit from its packaging and lay it carefully on a stable surface on top of the product bag so that it does not get scratched.
Square Mirror Installation Installation: Begin by determining the appropriate location and height. We recommend approximately 150cm from the floor if the mirror is to be used while standing, and 120cm from the floor if used while seated. Remove the unit from its packaging and lay it carefully on a stable surface on top of the product bag so that it does not get scratched.
Electrical Wiring Guide Wiring Instructions Ensure you have 240V supply cable located at the centre of where you wish to mount your mirror. Ensure the power is switched off before carrying out any electrical work. Ensure you have a hole into the wall large enough to fit the connector box on the magnifying mirror.
All the Ablaze Magnifying Mirrors have a 1 Year warranty. To use the warranty, repair or service the customer must provide purchase invoice/receipt, and any other relevant details.
Need help?
Do you have a question about the L252CSMC and is the answer not in the manual?
Questions and answers