Form Balancing Act Dual Monitor Arm Assembly Instructions

Balancing Act Dual Monitor Arm
Assembly Instructions
Components
OR
A / Clamp or B / Grommet 1 pc
C / 2 pcs D / 2 pcs
E / 2 pcs F / 2 pcs
G / 1 pc (6mm) H / 1 pc (5mm)
I / 1 pc (4mm) J / 1 pc (3mm)
L / 8 pcs
K / 1 pc (2mm)
(m4x8mm)
M / 8 pc
(m4x18mm)
N / 8 pcs
www.form-furniture.com
Form Furniture ©2023 All Rights Reserved.
Assembly
1A
Clamp Mount
min 5mm
max 34mm
thickness
2
Install Arms on
the Base Clamp
4
J
Use
STANDARD
Loosen the screw to allow
the arm 130° rotation.
OPTIONAL
Set to 45-degrees.
Tighten both screws
clockwise to the right.
1B
A
Tighten Firmly
3
C
C
Make sure to turn the arms
between 30–90°
Tighten two screws clockwise, then
loosen 1/4 turn to allow for 130° rotation.
5
F URNITURE MADE SIMPLE
Grommet Mount
min 8mm
max 80mm
thickness
G
Use
30–90° 30–90°
Use
(2x)
L/M
D
N
N Optional:
Use for recessed monitors.
®
B
OR
Tighten Firmly
J
Use Crosshead
screw driver
Monitor Max. 9kg
VESA 75/100