1. Manuals
  2. Brands
  3. Teamson Kids Manuals
  4. Swing Set
  5. Laguna T-OD-0069-00G
  6. Instructions manual

Teamson Kids Laguna T-OD-0069-00G Instructions Manual

Outdoor wooden swing set aqua and natural
Hide thumbs

Advertisement

Table of Contents

T-OD-0069-00G
Laguna Outdoor
Wooden Swing Set
Aqua and Natural
E-1224
ADULT ASSEMBLY
FOR RESIDENTIAL
REQUIRED
USE ONLY
1280 Lakes Parkway Suite 200 Lawrenceville GA 30043 | (770) 246-4898
www.teamson.com
WARNING
To reduce the risk of serious injury or
death, please read and follow these
instructions. Keep and refer to
instructions as needed and pass along
to any future owners of this item.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Laguna T-OD-0069-00G and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Teamson Kids Laguna T-OD-0069-00G

  • Page 1 T-OD-0069-00G Laguna Outdoor Wooden Swing Set Aqua and Natural E-1224 WARNING To reduce the risk of serious injury or death, please read and follow these instructions. Keep and refer to instructions as needed and pass along ADULT ASSEMBLY FOR RESIDENTIAL REQUIRED USE ONLY to any future owners of this item.
  • Page 2 Please Read this Before Assembly Review the Manual: Read the entire manual, especially the safety instructions, before starting. ▪ Prepare the Area: Ensure the installation area is level and suggest providing a 6-foot safety zone on ▪ all sides. Inventory All Parts: Lay out and check all parts, including small pieces that may be hidden in ▪...

  • Page 3: Warnings And Safe Play Instructions

    Warnings and Safe Play Instructions Regular Inspection and Maintenance Continuous Adult Supervision Required The recommendation to inspect regularly aligns well This remains appropriately placed first as adult after the playset is in use. This ties into the general supervision is the foundation of playground safety. No theme of ongoing vigilance for safety.
  • Page 4 Playground Surfacing Materials THE FOLLOWING SAFETY GUIDELINES ARE BASED ON SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY HANDBOOK TO ENSURE COMPLIANCE AND REDUCE THE RISK OF SERIOUS INJURY. Select Protective Surfacing • One of the most critical steps in reducing the risk of serious head injuries is installing shock-absorbing surfacing under and around your playground equipment.

  • Page 5: Limited Warranty

    Limited Warranty Thank you for choosing Teamson’s product. To enjoy the benefits of our warranty, please complete your register on our wedsite. Visit Our Website To register your purchase and EXTENDED activate your warranty, please visit: WARRANTY SIGN UP teamson.com/pages/warranty-registration Day count from date of purchase Product Age Customer Pays...

  • Page 6: Assembly Tips

    Assembly Tips Protrusion Hazard Ensure bolts do not protrude beyond the T-Nut as this can create a hazard. Refer to the image for proper assembly: CORRECT INCORRECT Bolt extends beyond the T-Nut, causing a Bolt is flush with the T-Nut. potential hazard.
  • Page 7 Recommended Maintenance and Care Instructions At the beginning of each play season: Disposal Instructions Tighten all hardware. • Safe Disassembly: When the playground equipment is no longer safe for use, carefully 2. Lubricate all metallic moving parts as disassemble it, removing all fasteners and instructed by the manufacturer.
  • Page 8 Safe Play Area and Usage Guidelines Exploded Drawing Ground Dimension Safe Play Area 170 11/16" [4336 mm] x 136 1/16" [3456.5 mm] 249 11/16" [6336 mm] x 215 1/16" [5456.5 mm] x 193 7/16" [4906.4 mm] 6336 249 11/16" 2000 79"...

  • Page 9: Required Tools

    Required Tools Rubber Hammer Mallet Assembly Helper Required Some steps will require two or three people for safe and proper assembly. Ensure you have a helper available. Ensure the Structure is Level Use a level tool to verify that the structure is even and balanced before moving to the next step.
  • Page 10 Wood Parts (Not actual size) Exploded Drawing 0010 Main Frame Side- Left - 3290010 (x2) - 1 1/4" x 2 1/2" x 88" 0011 Fence Joint Bottom Side - 3290011 (x1) - 1 1/4" x 2 1/2" x 42" 0012 Swing Beam Joint - 3290012 (x1) - 1 1/4"...
  • Page 11 Wood Parts (Not actual size) Exploded Drawing 0023 Main Frame Front-Bottom - 3290023 (x1) - 1 1/4" x 2 1/2" x 63" 0024 Platfotm Access Back Uptight - 3290024 (x1) - 1 1/4" x 2 1/2" x 31 1/2" 0025 Side Top - 3290025 (x1) - 1 1/4"...
  • Page 12 Wood Parts (Not actual size) Exploded Drawing 0035 Ladder Baffle - 3290035 (x1) - 5/8" x 2 1/2" x 15 3/4" 0036 Main Frame Left-Bottom - 3290036 (x1) - 15/16" x 2 1/2" x 64 9/16" 0037 SW Beam - 3290037 (x1) - 2"...
  • Page 13 Wood Parts (Not actual size) Exploded Drawing 0047 Fence Panel Back - 3300047 (x3) - 5/8" x 2 1/2" x 26" 0048 Awning Cross - 3290048 (x1) - 15/16" x 2 1/2" x 42" 0049 Roof Support Upright - 3290049 (x2) - 1 1/2"...
  • Page 14 Hardware (Actual Size) Exploded Drawing S0 Truss Head Screw S15 Wood Screw (x8) - #8 x 7/8" (x2) - #8 x 1-3/4" S2 Wood Screw S20 Wood Screw (x11) - #8 x 1 1/2" (x98) - #8 x 1-3/8" S3 Wood Screw S37 Pan Screw (x18) - #8 x 2-1 /2"...
  • Page 15 Hardware (Actual Size) Exploded Drawing G1 Hex Bolt (x2) - 5/16" x 1-1/2" G3 Hex Bolt (x2) - 5/16" x 2-1/4" G5 Hex Bolt (x3) - 5/16" x 4-1/2" G8 Hex Bolt (x2) - 5/16" x 2" G9 Hex Bolt (x6) - 5/16"...
  • Page 16 Hardware (Actual Size) Exploded Drawing G35 Hex Bolt (x8) - 5/16" x 3-1/4" G36 Hex Bolt (x13) - 5/16" x 2-3/4" PB2 Pan Bolt (x16) - 1/4" x 1-1/4" PB5 Pan Bolt (x1) - 1/4" x 2" WL3 Wafer Head Lag Screw (x8) - 1/4"...
  • Page 17 Accessory Parts (Not actual size) Exploded Drawing 2000002 2004016 2030026 Teamson Playset Plaque (x1) Wooden Grounding Pile (x6) Poles Flat Bracket (x1) 2130022 2110023 2030018 Rock A (x4) Rock B (x4) Firemans Top Weilding Pole (x1) 2110012 2002021 2030005 Hand Grip (x4) Quick-Link (x8) L-Beam Bracket (x2) 2001006...
  • Page 18 Accessory Parts (Not actual size) Exploded Drawing 2106015 2002019 2130016 Telescope Parasolid (x1) Firemans Pole Ground Stake (x2) Swing-Rope 49 5/8" (x2) 2030017 Friemans Main (x1) 2160028 Rope-Crimp(x1) 2230002 Fabric Roof B (x1)
  • Page 19 Accessory Parts (Not actual size) Exploded Drawing 2230001 Fabric Roof A (x1) 2130024 Mesh Swing (x1) 2130021 48in High Rail Slide (x1)
  • Page 20 Step 1 Exploded Drawing Wood Parts Hardware TN2 Tee-Nut 0010 Main Frame Side- Left G14 Hex Bolt (x2) - 1 1/4" x 2 1/2" x 88" (x8) - 5/16" x 1-1/4" (x8) - 5/16" G36 Hex Bolt 0011 Fence Joint Bottom Side (x2) - 5/16"...
  • Page 21 Step 2 Exploded Drawing Wood Parts Hardware 0013 Main Frame Front-Left 0021 Main Frame Back-Bottom G14 Hex Bolt (x1) - 1 1/4" x 2 1/2" x 88" (x1) - 1 1/4" x 2 1/2" x 63" (x9) - 5/16" x 1-1/4" FW2 Washer Flat 0015 Fence Joint Bottom Back 0024 Platfotm Access Back Uptight...
  • Page 22 Step 3 Exploded Drawing Wood Parts Hardware 0013 Main Frame Front-Left 0023 Main Frame Front-Bottom G14 Hex Bolt (x1) - 1 1/4" x 2 1/2" x 88" (x7) - 5/16" x 1-1/4" (x1) - 1 1/4" x 2 1/2" x 63" FW2 Washer Flat 0014 Front Access Upright 0032 Main Frame Front-Top...
  • Page 23 Step 4 Exploded Drawing Wood Parts Hardware 0022 Main Frame Side-Right G14 Hex Bolt (x2) - 1 1/4" x 2 1/2" x 88" (x4) - 5/16" x 1-1/4" FW2 Washer Flat 0025 Side Top (x4) - 5/16" (x1) - 1 1/4" x 2 1/2" x 42" TN2 Tee-Nut 0030 Platform Frame Side (x4) - 5/16"...
  • Page 24 Step 5 Exploded Drawing Hardware WL5 Wafer Head Lag Screw (x5) - 1/4" x 2-1/2" Pre-drill each hole using a 3/16” drill bit. Flush...
  • Page 25 Step 6 Exploded Drawing Hardware WL5 Wafer Head Lag Screw (x5) - 1/4" x 2-1/2" Pre-drill each hole using a 3/16” drill bit. Flush...
  • Page 26 Step 7 Exploded Drawing Hardware WL5 Wafer Head Lag Screw (x10) - 1/4" x 2-1/2" Pre-drill each hole using a 3/16” drill bit. Flush...
  • Page 27 Step 8 Exploded Drawing Wood Parts Hardware 0041 Climb SideV S11 Wood Screw FW2 Washer Flat (x2) - 1 3/8" x 2 1/2" x 49 5/8" (x4) - #8 x 2" (x4) - 5/16" G36 Hex Bolt LW2 Washer Lock (x2) - 5/16"...
  • Page 28 Step 9 Exploded Drawing Wood Parts Hardware 0054 Main Frame Oblique Support S11 Wood Screw FW2 Washer Flat (x2) - 1 1/2" x 1 1/2" x 40 3/4" (x4) - #8 x 2" (x8) - 5/16" LW2 Washer Lock 0057 Main Frame Baffle WL5 Wafer Head Lag Screw (x2) - 1/4"...
  • Page 29 Step 10 Exploded Drawing Wood Parts Hardware 0044 Side Joist G35 Hex Bolt LW2 Washer Lock (x2) - 1 1/2" x 1 1/2" x 39 3/8" (x8) - 5/16" x 3-1/4" (x8) - 5/16" FW2 Washer Flat LN2 Lock-Nut (x16) - 5/16" (x8) - 5/16"...
  • Page 30 Step 11 Exploded Drawing Wood Parts Hardware 0035 Ladder Baffle 0051 Ladder Left S11 Wood Screw (x1) - 5/8" x 2 1/2" x 15 3/4" (x1) - 1 3/8" x 2 1/2" x 52 13/16" (x16) - #8 x 2" 0050 Ladder Right 0052 Tread S20 Wood Screw...
  • Page 31 Step 12 Exploded Drawing Hardware G12 Hex Bolt LW2 Washer Lock (x2) - 5/16" x 4-1/4" (x2) - 5/16" FW2 Washer Flat LN2 Lock-Nut (x4) - 5/16" (x2) - 5/16" Flush...
  • Page 32 Step 13 Wood Parts Hardware S7 Pan Screw 0026 Climb Board A 0028 Rope Board (x5) - 5/8" x 4 1/2" x 41 15/16" (x1) - 5/8" x 4 1/2" x 41 15/16" (x44) - #12 x 2" 0027 Climb Board C 0042 Climb Board B (x3) - 5/8"...
  • Page 33 Step 14 Exploded Drawing Wood Parts Hardware 0055 Diagonal Braces S2 Wood Screw (x1) - 1" x 2" x 46 5/8" (x11) - #8 x 1 1/2" Part 0055 should be in the centered position, with the bottom of the wood aligned with the edge of the hole.
  • Page 34 Step 15 Exploded Drawing Accessory Hardware PB2 Pan Bolt LW1 Washer Lock 2130022 (x16) - 1/4" x 1-1/4" (x16) - 1/4" Rock A (x4) FW1 Washer Flat TN1 Tee-Nut 2110023 (x16) - 1/4" Rock B (x4) (x16) - 1/4" 2130022 2110023 2110023 2130022...
  • Page 35 Step 16 Exploded Drawing Wood Parts Hardware 0043 Floor Joist S4 Wood Screw (x1) - 1 1/4" x 3" x 39 3/8" (x4) - #8 x 3" 5/8" 16mm 0043...
  • Page 36 Step 17 Exploded Drawing Wood Parts Hardware 0029 Floor Board B 0045 Side Joist S20 Wood Screw (x1) - 5/8" x 3" x 41 15/16" (x54) - #8 x 1-3/8" (x8) - 5/8" x 4 1/2" x 41 15/16" 0045 0029 0045...
  • Page 37 Step 18 Exploded Drawing Wood Parts Hardware 0046 Fence Panel Side A 0056 Fence Panel Side S20 Wood Screw (x6) - 5/8" x 2 1/2" x 34 7/16" (x1) - 5/8" x 2 1/2" x 34 7/16" (x28) - #8 x 1-3/8" 2 1/2"...
  • Page 38 Step 19 Exploded Drawing Wood Parts Hardware 0047 Fence Panel Back S20 Wood Screw (x3) - 5/8" x 2 1/2" x 26" (x12) - #8 x 1-3/8" 2 1/2" 63mm 2 1/2" 63mm 2 1/2" 63mm 0047 Flush...
  • Page 39 Step 20 Exploded Drawing Wood Parts Hardware 0048 Awning Cross S3 Wood Screw (x1) - 15/16" x 2 1/2" x 42" (x4) - #8 x 2-1 /2" Flush 0048...
  • Page 40 Step 21 Exploded Drawing Wood Parts Hardware 0017 Awning Oblique Support S11 Wood Screw FW2 Washer Flat (x2) - 1 1/4" x 2 1/2" x 14 3/16" (x2) - #8 x 2" (x4) - 5/16" LW2 Washer Lock WL5 Wafer Head Lag Screw (x2) - 1/4"...
  • Page 41 Step 22 Exploded Drawing Accessory Wood Parts Hardware 0037 SW Beam S0 Truss Head Screw 2000002 (x1) - 2" x 5 1/4" x 88" (x4) - #8 x 7/8" Teamson Playset Plaque (x1) G36 Hex Bolt 2030005 L-Beam Bracket(x2) (x2) - 5/16" x 2-3/4" FW2 Washer Flat 2001006 Sheeps eye Swing Hanger (x6)
  • Page 42 Step 23 Exploded Drawing Wood Parts Hardware 0038 SW Support Cross G5 Hex Bolt LW2 Washer Lock (x1) - 2" x 3" x 50 15/16" (x3) - 5/16" x 4-1/2" (x5) - 5/16" 0039 SW Support G22 Hex Bolt LN2 Lock-Nut (x2) - 2"...
  • Page 43 Step 24 Exploded Drawing Accessory Hardware G36 Hex Bolt LW2 Washer Lock 2030028 (x5) - 5/16" x 2-3/4" (x5) - 5/16" Beam Bracket L(x1) FW2 Washer Flat LN2 Lock-Nut 2030029 Beam Bracket R(x1) (x10) - 5/16" (x5) - 5/16" G36 x5 2030028 2030029...
  • Page 44 Step 25 Exploded Drawing Hardware G27 Hex Bolt FW2 Washer Flat LN2 Lock-Nut (x4) - 5/16" x 1-3/4" (x8) - 5/16" (x4) - 5/16" G27 x4...
  • Page 45 Step 26 Exploded Drawing Wood Parts Hardware 0016 Main-Roof Frame Joint S11 Wood Screw FW2 Washer Flat (x4) - 1 1/4" x 1 7/8" x 6 1/4" (x4) - #8 x 2" (x4) - 5/16" G9 Hex Bolt TN2 Tee-Nut 0031 Roof Frame Side (x4) - 5/16"...
  • Page 46 Step 27 Exploded Drawing Hardware S11 Wood Screw (x16) - #8 x 2"...
  • Page 47 Step 28 Exploded Drawing Wood Parts Hardware 0034 Roof Frame Front-Back S11 Wood Screw (x2) - 15/16" x 2 1/2" x 40 3/4" (x8) - #8 x 2" 0034 Flush 0034 Flush...
  • Page 48 Step 29 Exploded Drawing Wood Parts Hardware 0049 Roof Support Upright S11 Wood Screw LW2 Washer Lock (x2) - 1 1/2" x 1 1/2" x 25" (x2) - #8 x 2" (x2) - 5/16" G3 Hex Bolt TN2 Tee-Nut (x2) - 5/16" (x2) - 5/16"...
  • Page 49 Step 30 Exploded Drawing Wood Parts Hardware 0053 Roof Support Across S3 Wood Screw (x1) - 1 1/2" x 1 1/2" x 40 3/4" (x2) - #8 x 2-1 /2" 0053 Flush...
  • Page 50 Step 31 Exploded Drawing Accessory Hardware S37 Pan Screw 2230001 (x12) - #7 x 5/8" Fabric Roof A (x1) Fold the canopy in half, align the centerline with the top center, and secure it using S37 screws. The S37 screws on both sides should be 2 inches from the edges, with the middle screws evenly distributed.
  • Page 51 Step 32 Exploded Drawing Accessory Hardware S37 Pan Screw 2230002 (x8) - #7 x 5/8" Fabric Roof B (x1) The roof should be installed from top to bottom, with the edges of the canopy aligned to the posts and the top aligned with the top of part 0031.
  • Page 52 Step 33 Exploded Drawing Accessory Hardware WL3 Wafer Head Lag Screw LW1 Washer Lock 2110012 (x8) - 1/4" x 1-3/8" (x8) - 1/4" Hand Grip (x4) FW1 Washer Flat (x8) - 1/4" 2110012 Note: Please ensure that accessory 2110012 is centered in each position. 5 "...
  • Page 53 Step 34 Exploded Drawing Accessory Hardware G27 Hex Bolt LW2 Washer Lock 2110014 (x1) - 5/16" x 1-3/4" (x1) - 5/16" Steering Wheel (x1) FW2 Washer Flat LN2 Lock-Nut (x2) - 5/16" (x1) - 5/16" 2110014...
  • Page 54 Step 35 Exploded Drawing Accessory Hardware S15 Wood Screw 2106015 (x2) - #8 x 1-3/4" Telescope Parasolid (x1) 2106015 Center installation• 7 " 178mm...
  • Page 55 Step 36 Exploded Drawing Accessory Hardware S7 Pan Screw 2130021 (x47) - #12 x 2" 48in High Rail Slide (x1) 2130021 Place the slide in the center of the opening. Pre-drill each hole using a 1/8” drill bit.
  • Page 56 Step 37 Exploded Drawing Accessory 2160028 Rope-Crimp (x1) 2160028 Thread both ends of the rope through the holes on the main structure and tie knots. Please ensure the rope is not in a taut state.
  • Page 57 Step 38 Exploded Drawing Accessory Hardware G1 Hex Bolt LW2 Washer Lock 2030018 (x2) - 5/16" x 1-1/2" (x2) - 5/16" Firemans Top Weilding Pole (x1) FW2 Washer Flat TN2 Tee-Nut (x2) - 5/16" (x2) - 5/16" Assemble T-Nuts first with hammer! 2030018...
  • Page 58 Step 39 Exploded Drawing Accessory Hardware PB5 Pan Bolt LN1 Lock-Nut 2030017 (x1) - 1/4" x 2" (x1) - 1/4" Friemans Main (x1) FW1 Washer Flat 2030026 Poles flat Bracket (x1) (x2) - 1/4" Move the playset to its final position before installation. The final position must be on level ground.
  • Page 59 Step 40 Exploded Drawing Accessory 2002019 Firemans Pole Ground Stake (x2) Hammer the U-shaped ground stakes into the holes on the plate until they are fully anchored in the ground. 2002019...
  • Page 60 Step 41 Exploded Drawing Accessory 2010020 2002021 2130016 MK Bar (x1) Quick-Link (x8) Swing-Rope 49 5/8" (x2) 2160025 2110027 Acro Rope (x2) Plastic Handle (x2) 2002021 2160025 2010020 2110027 2130016 2130016 2002021...
  • Page 61 Step 42 Exploded Drawing Accessory Hardware S0 Truss Head Screw 2000003 (x8) - #8 x 7/8" Playset ID Plaque (x1) 2000003 3 " 76mm...
  • Page 62 Step 43 Exploded Drawing Accessory 2130024 Mesh Swing (x1) First, remove the original G35 bolts, then install the mesh swing. 2130024...
  • Page 63 Step 44 Exploded Drawing Accessory Hardware S3 Wood Screw 2004016 (x12) - #8 x 2-1 /2" Wooden Grounding Pile (x6) check first for under-ground wiring, cables or gas lines. Warning! To prevent tipping and avoid potential injury, stakes must be driven 10 1/2”(266.7mm) into ground.

Table of Contents