Advertisement
EXALUS TR7
Spółka z ograniczoną odpowiedzialnością sp.k.
Kuchary 24F
63-322 Gołuchów
www.exalus.pl
Transmission power: ERP<25 mW
CHANNEL -
CHANNEL +
EXALUS HOME system
- home automation system
for remote controls
Controllers operate
at 868 Mhz
frequency
UP
STOP
DOWN
BATTERY
COMPARTMENT
User's manual
NX-BIDI PRO
P2
Advertisement
Table of Contents
Summary of Contents for EXALUS HOME NX-BIDI PRO
- Page 1 EXALUS HOME system - home automation system User's manual EXALUS TR7 for remote controls Spółka z ograniczoną odpowiedzialnością sp.k. Kuchary 24F 63-322 Gołuchów NX-BIDI PRO www.exalus.pl Controllers operate at 868 Mhz frequency Transmission power: ERP<25 mW CHANNEL - STOP CHANNEL +...
- Page 2 1. APPEARANCE LCD display battery keyboard configuration buttons Button Function transmitting signals to a receiver(s) / increasing the settings transmitting signals to a receiver(s) / decreasing the settings change of the channel number/ change of the group number (incrementation) change of the channel number / change of the group number (decrementation) entry to sub-menu / confirmation of settings entry to main menu of the remote control / menu...
-
Page 3: Technical Data
2. TECHNICAL DATA Rated supply voltage 3 V DC Battery type 1 x CR2430 Operating range up to 200 m in open area Transmission radio - 868 Mhz band Manner of transmission one-way algorithm is based on a 128-bit key (EXTA LIFE standard) Coding transmission with addressing (EXTRA... - Page 4 3. LCD DISPLAY - MAIN SCREEN Description of displayed elements: current day of the week ● work in manual mode - MANUAL (deactivation of automatic programs- ● manual change of summer to winter time (the icon is displayed on the time settings screen) ●...
-
Page 5: Setting The Time And Date
4. MAIN MENU You can enter the menu by holding down the P2 button and then, you can navigate between main screens - by pressing the P2 button briefly. You can exit the menu after navigating through all screens or automatically after 10 seconds. Screens visible in the remote control menu: ●... - Page 6 4. Using up/down buttons, select the mode of change from summer to winter time: - manual change of time by the user - automatic change of time (last Saturday of March/ last Saturday of October). 5. Using up/down buttons, set the date - confirm the setting with the stop button. 6.
-
Page 7: Operation
6. OPERATION Having selected an activated channel or group by pressing buttons ▼ , * the remote control will transmit relevant codes by radio. Code transmission is confirmed with illumination of a relevant pictogram on the LCD screen. A group can be selected only after groups have been defined (see: GROUP PROGRAMMING) - Page 8 Programs are activated once the remote control is switched to the automatic mode. 8. SETTING THE NUMBER OF ACTIVATED CHANNELS Maximum (default) number of channels on the NX-BIDI PRO remote control is 16. A channel that has been activated (an active channel) is selected by using buttons. If the remote control user does not use all the channels, then their number can be reduced to the required number.
-
Page 9: Setting Programs
9. SWITCHING BETWEEN CHANNELS/GROUPS In the ordinary course of use, the user switches between the activated channels/groups using buttons . Groups are visible only if they have been defined. 10. SETTING PROGRAMS The remote control can be set for 100 programs at the maximum. A program can be linked to a particular channel, to several channels or a group. - Page 10 ● day of the week, ● command: open, close, ● program status: activation, deactivation. Programs are set in the menu of the remote control - ProG' screen 1. Press and hold the P2 button to navigate to the ProG screen in the remote control menu. 2.
- Page 11 DEACTIVATED ACTIVATED DEACTIVATED ACTIVATED...
-
Page 12: Defining Groups
● NX-BIDI PRO remote control enables the user to set up 10 groups at the maximum. ● Each group can be assigned with 16 elements at the maximum (concerns only defined elements). - Page 13 removal Addition of channel of channel from a group to a group selection selection of a group of a group 12. DEFINING RELAY BETWEEN CHANNELS IN A GROUP ● Typically commands are sent immediately one after the other (with no relay). If needed, the User can set additional relay between subsequent commands in a group from 0 to 60 seconds with 1 second increments.
-
Page 14: Replacement Of The Battery
13. SIGNALLING THE LOW BATTERY STATUS The remote control will signal the low battery status, thus, informing that it needs to be replaced. This underlies correct operation of the remote control and has vital impact on the operating range. Information about low battery status is displayed on the LCD display in the form of “Lo_batt”...
Need help?
Do you have a question about the NX-BIDI PRO and is the answer not in the manual?
Questions and answers