Advertisement
1-5/8"
2-3/4"
or
USE MONOLITHIC
USE LAMINATED
TEMPERED GLASS
TEMPERED GLASS
ITEM NO.
DESCRIPTION
HPF90H0BS
90˚ Hold-Open Brushed Stainless Steel
HPF90H0PS
90˚ Hold-Open Polished Stainless Steel
HPF90H0SA
90˚ Hold-Open Satin Anodized
HPF90H0MB
90˚ Hold-Open Matte Black
HPF90NH0BS
90˚ No Hold-Open Brushed Stainless Steel
HPF90NH0PS
90˚ No Hold-Open Polished Stainless Steel
HPF90NH0SA
90˚ No Hold-Open Satin Anodized
HPF90NH0MB
90˚ No Hold-Open Matte Black
Minimum Order: 1 each.
PAGE 1 OF 5
INSTALLATION INSTRUCTIONS
FHC HYDRAULIC PATCH FITTINGS
2-9/16" Setback 90 Degree Hold-Open Models
2-9/16" Setback 90 Degree No Hold-Open Models
7-3/16"
Base Plate
1-13/16" W x 4-7/8" L x 1/2" H
GLAZING SUPPLIES
SHOWER DOOR HARDWARE
2323 Firestone Blvd. South Gate, CA 90208 | Toll Free: (888) 295-4531 | Fax: (323) 336-8307 | fhc-usa.com
• For 3/8", 1/2", or 9/16 Tempered Glass
• 2-9/16" European Pivot Setback
• Hold-Open and No Hold-Open
Models Available
CONTENTS:
ARCHITECTURAL HARDWARE
RAILING HARDWARE
CSI DIVISION 08
SECTION
08 4210
TRANSACTION HARDWARE
METAL EXTRUSIONS
LIT0095 REV. 07.01.22
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for FHC HPF90H0BS
Summary of Contents for FHC HPF90H0BS
- Page 1 Minimum Order: 1 each. GLAZING SUPPLIES ARCHITECTURAL HARDWARE TRANSACTION HARDWARE SHOWER DOOR HARDWARE RAILING HARDWARE METAL EXTRUSIONS 2323 Firestone Blvd. South Gate, CA 90208 | Toll Free: (888) 295-4531 | Fax: (323) 336-8307 | fhc-usa.com PAGE 1 OF 5 LIT0095 REV. 07.01.22...
- Page 2 FHC HYDRAULIC PATCH FITTING INSTRUCTIONS FRAMELESS HARDWARE COMPANY LLC STEP 1: Hinge Layout 1. Mark hole positions using 2-9/16" the Base Plate as a template. 1/8" 6-15/16" 3/16" 2. Drill 3/8" diameter holes 3/16" 1-3/8" deep. 3. Insert the concrete anchors using a 3/16"...
- Page 3 FHC HYDRAULIC PATCH FITTING INSTRUCTIONS FRAMELESS HARDWARE COMPANY LLC STEP 3: Inserting Glass Gaskets For 3/8" (10 mm) Glass 1/6" = White 1/8" = Aluminum 1/16" x 1pc Glass 1/16" x 2pcs Thickness 3/8" Insert the Patch Fitting with Gaskets into the glass cut-out and attach with set screws included.
-
Page 4: Step 6: Attaching The Covers
FHC HYDRAULIC PATCH FITTING INSTRUCTIONS FRAMELESS HARDWARE COMPANY LLC STEP 5: Adjustments 39-3/8" 220 lbs Adjustment of closing speed: • Two Regulating Valves (I) and (II) • Decrease Speed • Increase Speed Glass Thickness • Valve (I): Control Closing Range 170˚ to 15˚... -
Page 5: Glass Specifications
FHC HYDRAULIC PATCH FITTING INSTRUCTIONS FRAMELESS HARDWARE COMPANY LLC GLASS SPECIFICATIONS: MAXIMUM HEIGHT 102" (2591 mm) MAXIMUM WIDTH 39-3/8" (1000 mm) MAXIMUM WEIGHT 220 lbs (100 kg) Patch EDGE OF GLASS 1/8" (3 mm) R1/2" (R13 mm) 2-3/16" 6-1/2" (165 mm)
Need help?
Do you have a question about the HPF90H0BS and is the answer not in the manual?
Questions and answers