1. Manuals
  2. Brands
  3. Studio Technologies Manuals
  4. Network Hardware
  5. 5682
  6. User manual

Studio Technologies 5682 User Manual

St 2110 to dante bridge
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Model 5682
ST 2110 to Dante Bridge
User Guide
Issue Preliminary 3, January 2025
This User Guide is applicable for serial numbers
M5682-01-00151 and later with Main Firmware 1.03 and later
M5682-02-00151 and later with Main Firmware 1.03 and later
Copyright © 2025 by Studio Technologies, Inc., all rights reserved
studio-tech.com
50782-0125, Issue Preliminary 3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5682 and is the answer not in the manual?

Questions and answers

Related Manuals for Studio Technologies 5682

Summary of Contents for Studio Technologies 5682

  • Page 1 This User Guide is applicable for serial numbers M5682-01-00151 and later with Main Firmware 1.03 and later M5682-02-00151 and later with Main Firmware 1.03 and later Copyright © 2025 by Studio Technologies, Inc., all rights reserved studio-tech.com 50782-0125, Issue Preliminary 3...
  • Page 2 This page intentionally left blank.

  • Page 3: Table Of Contents

    Technical Notes ........................ 20 Specifications ........................26 Appendix A–Front-Panel Menu Structure ................. 28 Appendix B–ZMAN Firmware Update Screens ..............29 Appendix C––Advanced ZMAN General Settings Screen..........33 Model 5682 User Guide Issue Preliminary 3, January 2025 Studio Technologies, Inc. Page 3...

  • Page 4: Revision History

    • Miscellaneous improvements, clarifications, and corrections. Issue Preliminary 2, January 2025: • Miscellaneous improvements, clarifications, and corrections. Issue Preliminary 1, November 2024: • Initial Preliminary release. Issue Preliminary 3, January 2025 Model 5682 User Guide Page 4 Studio Technologies, Inc.

  • Page 5: Introduction

    The Model 5682’s primary application is to intercon- nect audio channels associated with two independent networks, one that supports ST 2110 and the other Figure 1. Model 5682 ST 2110 to Dante Bridge front view Model 5682 User Guide Issue Preliminary 3, January 2025 Studio Technologies, Inc.
  • Page 6 AES67. The Model 5682 can be effective when used in both So, in theory, the Model 5682 can serve both as a fixed and mobile applications. Ideal uses would in- Ravenna to Dante and a AES67 to Dante bridge.

  • Page 7: Firmware Updating

    ST 2110 and Dante network interfaces always mance of the unit. All six of the Model 5682’s Gigabit remains within the digital domain. To achieve au- Ethernet ports support twisted-pair signals, each with...

  • Page 8: Installation

    4-pin XLR connector. The of the ports are provided for interconnection with one DC source can be used to power the Model 5682 or or two local area networks (LANs) associated with a ST 2110 networking scheme.

  • Page 9: Management Port Connection

    RJ45 jacks that flexibility and present a failure point; it’s optimal if a are located on the back of the Model 5682’s enclo- Dante Ethernet port connects directly to a separate sure. The Ethernet ports support auto MDI/MDI-X port on an Ethernet switch.

  • Page 10: Connecting Ac Mains Power

    The Model 5682’s management Ethernet port is Safety Warning: The Model 5682 does not con- utilized by the factory at the time of Model 5682 man- tain an AC mains disconnect switch. As such, the ufacture, providing access to an internal web server AC mains cord plug serves as the disconnection and associated set of configuration web pages.

  • Page 11: Dante Configuration

    5682-02’s Dante interface will have 64 Dante receiver (input) channels with default names of Ch01 through For an overview of how to configure the Model 5682’s Ch64. When the Model 5682-02’s sample rate has ST 2110 capabilities, refer to the short video that was been selected for 44.1 or 48 kHz, the 64 transmitter...

  • Page 12: Network Configuration

    Dante Redundancy section of Dante Controller’s Network Configuration tab. The Note that if the Model 5682’s Dante interface con- choices are Switched or Redundant. figuration has been set for Redundant, the primary...

  • Page 13: Front-Panel Display

    Front-Panel Display Page 03-to-03, etc. This will be true all the way up to chan- Descriptions nel 32 for the Model 5682-01 and up to channel 64 for the Model 5682-02. (16 and 32 channels, respective- The following sections provide information about ly, when the Dante sample rate is selected for 88.2...
  • Page 14 ZMAN reboot front-panel menu page or by power The Manual setting allows the ST 2110 control Ether- cycling (restarting) the Model 5682. net interface’s IP address and related parameters to Menu Page 4 – ST 2110 Control Interface be manually entered.
  • Page 15 Alternately, rebooting select (highlight) the desired action. The choices are the Model 5682 by means of power cycle can also be to cancel or to confirm. Press the Enter pushbutton utilized to cause a new subnet mask value to be used.
  • Page 16 Address: This menu page shows the IP address utilized by the Dante secondary or management associated with Model 5682’s Dante primary ports. When the primary IP address configuration interface. (This address has nothing to do with the...
  • Page 17 Brooklyn front-panel menu page. Alternately, this menu. To start the process of rebooting the rebooting the Model 5682 by means of a power cycle Brooklyn module, press the Enter pushbutton on the can also be utilized to cause a new Dante primary unit’s front panel.

  • Page 18: Screen Saver

    After the Model 5682 has completed its of row one, the ST 2110 interface name. To cause power-up sequences, full operation will begin.

  • Page 19: Rj45 Led Indicators

    Dante RJ45 LED Indicators network and an external clock source (timing refer- On the Model 5682’s back panel are six RJ45 jacks ence) is being utilized. The SYNC LED will slowly that are provided for interfacing with the unit’s three flash green if the Model 5682’s Dante interface is...

  • Page 20: Technical Notes

    Model 5682’s front-panel menu page that directly same local area network (LAN). Dante Controller must displays the IP address assigned to the Dante primary be able to directly communicate with the Model 5682 (PRI) port. for configuration changes to be made.

  • Page 21: Firmware Update

    The Dante Updater program connects to Card B. To begin the update process, insert the the Model 5682 by way of an Ethernet port associat- prepared flash drive into the USB receptacle that is ed with the Dante interface, rather than using a USB labeled Firmware Update A, then the Model 5682 flash drive.
  • Page 22 To observe the version M5682-NNvXrX.zoem where the NNs are either numbers of the loaded main firmware, simply view 01 for a Model 5682-01 or 02 for a Model 5682- the unit’s front-panel display pages. 02. Xs represent the actual version number. As an example, a file with a name of M5682-02v1r9.
  • Page 23 When completed, We refer to this as the “landing page,” an exam- the Model 5682 and associated ZMAN module ple of which is shown in Appendix B, Figure 1. will be operating under the new firmware. The info web page will again appear.
  • Page 24 .zip file. USB flash drive. 7. Apply power to the Model 5682. Power can be Once the USB flash drive has been prepared it can provided by connecting AC mains or a source of be used to update both DFB Card B and DFB Card 12 volts DC.
  • Page 25 Note that the Dante Updater software application requires internet connectivity for operation. Even if the desired .dnt file is stored locally, internet access is still required. Model 5682 User Guide Issue Preliminary 3, January 2025 Studio Technologies, Inc. Page 25...

  • Page 26: Specifications

    Model 5682-02: 64 Versions Available: Network Audio Technology – Dante: Model 5682-01: supports up to 32 channels (44.1 or Type: Dante audio-over-Ethernet 48 kHz Dante sample rates) and 16 channels (88.2 or AES67-2018 Support: yes 96 kHz Dante sample rates) Dante Domain Manager (DDM) Support: yes Model 5682-02: supports up to 64 channels (44.1 or...
  • Page 27 Mounting: one space (1U) in a standard 19-inch rack Weight: 3.3 pounds (1.5 kg) Specifications and information contained in this User Guide subject to change without notice. Model 5682 User Guide Issue Preliminary 3, January 2025 Studio Technologies, Inc. Page 27...

  • Page 28: Appendix A-Front-Panel Menu Structure

    Model 5682 ST 2110 TO DANTE BRIDGE Appendix A–Front-Panel Menu Structure Model 5682 User Guide Issue Preliminary 3, January 2025 Studio Technologies, Inc. Page 28...

  • Page 29: Appendix B-Zman Firmware Update Screens

    Model 5682 ST 2110 TO DANTE BRIDGE Appendix B–ZMAN Firmware Update Screens Figure 1. Figure 2. Model 5682 User Guide Issue Preliminary 3, January 2025 Studio Technologies, Inc. Page 29...
  • Page 30 Model 5682 ST 2110 TO DANTE BRIDGE Appendix B–ZMAN Firmware Update Screens, continued Figure 3. Figure 4. Issue Preliminary 3, January 2025 Model 5682 User Guide Page 30 Studio Technologies, Inc.
  • Page 31 Model 5682 ST 2110 TO DANTE BRIDGE Appendix B–ZMAN Firmware Update Screens, continued Figure 5. Figure 6. Model 5682 User Guide Issue Preliminary 3, January 2025 Studio Technologies, Inc. Page 31...
  • Page 32 Model 5682 ST 2110 TO DANTE BRIDGE Appendix B–ZMAN Firmware Update Screens, continued Figure 7. Issue Preliminary 3, January 2025 Model 5682 User Guide Page 32 Studio Technologies, Inc.

  • Page 33: Appendix C-Advanced Zman General Settings Screen

    Model 5682 ST 2110 TO DANTE BRIDGE Appendix C–Advanced ZMAN General Settings Screen Model 5682 User Guide Issue Preliminary 3, January 2025 Studio Technologies, Inc. Page 33...

This manual is also suitable for:

M5682-01M5682-02

Table of Contents