Summary of Contents for SWP COBRA STEALTH PORTABLE
- Page 1 INSTRUCTION MANUAL Portable Fume Extraction Unit Version 1.0 - Last updated 10/04/2025...
-
Page 2: Ce - Declaration Of Conformity
Directives 2006/42/CE, 2014/35/UE, 2014/30/UE, 2014/53/UE-2011/65/UE We, the undersigned Specialised Welding Products Limited (SWP Ltd) based at SWP Sales & Distribution Centre, Unit 1, Withins Point, Withins Road, Haydock Industrial Centre, Haydock, WA11 9UD, UK in the person of our legal representative, Mr. -
Page 3: Warnings
QUALIFIED STAFF: means personnel who professionally carry out activities relating to plant engineering such as, for example, electrician, plumber, installer, etc. AUTHORISED TECHNICIAN: means specialized technical personnel, authorised by SWP Ltd. to intervene on the machine. T: 01942 719930 I E: sales@specialisedwelding.co.uk I W:www.specialisedwelding.co.uk... -
Page 4: Images And Representations
Do not carry out repairs or modifications to the machine, unless authorised by SWP Ltd. Do not carry out maintenance when the machine is running. To clean the machine, do not use corrosive or harmful detergents to people's health. -
Page 5: Manufacturer And User Responsibility
Cobra Stealth Fume Portable MANUFACTURER AND USER RESPONSIBILITY Specialised Welding Products Limited (SWP Ltd) The manufacturer, disclaims any liability arising from incorrect use or misuse of the machine, from any damage caused by the use of non-original spare parts, from the consequences of maintenance carried out incorrectly and from tampering with the product, its control circuits or the system software. -
Page 6: Table Of Contents
Cobra Stealth Fume Portable CONTENTS Page CE - DECLARATION OF CONFORMITY WARNINGS SYMBOLS AND STAFF IMAGES AND REPRESENTATIONS SAFETY WARNINGS MANUFACTURER AND USER RESPONSIBILITY CERTIFICATIONS INTRODUCTION PRODUCT DESCRIPTION FINAL USE NON AUTHORISED USE RESIDUAL RISKS SAFETY STICKERS DOCUMENTATION WARRANTY TECHNICAL DATA MACHINE DESCRIPTION TECHNICAL CHARACTERISTICS OF FLEXIBLE PIPING DELIVERY TRANSPORT AND INSTALLATION... - Page 7 Cobra Stealth Fume Portable CONTENTS Page HOW TO USE MAINTENANCE ORDINARY MAINTENANCE REPLACING THE FILTERS: PRELIMINARY INDICATIONS REPLACING THE CARTRIDGE FILTER 5.2.1 REPLACING THE ACTIVATED CARBON FILTER 5.2.2 REPLACEMENT OF PROTECTION FUSES END OF USE PRELIMINARY OPERATIONS MACHINE DISPOSAL SPARE PARTS WIRING DIAGRAM COBRA STEALTH PROBLEMS, CAUSES AND SOLUTIONS...
-
Page 8: Introduction
Cobra Stealth Fume Portable 1. INTRODUCTION PRODUCT DESCRIPTION The COBRA STEALTH machine described in this booklet is a portable unit for the extraction, filtration and deodorization of welding fumes in the electronic industry in general, in bodywork departments and for small welding. Polluted air is sucked in by a brush motor with integrated aspirator positioned inside the machine casing. -
Page 9: Final Use
It is forbidden to use it with systems for capturing and conveying the flow rate that do not allow the entry of air at room temperature as prescribed. SWP Ltd. disclaims any liability for damage to the machine itself, to people or property caused by the incorrect use of the collection cap or the use of inappropriate hoods. -
Page 10: Residual Risks
RESIDUAL RISKS The Risk Analysis conducted by SWP Ltd. on the product and contained in the Technical File has made it possible to eliminate all of the main sources of danger connected to machine use; nevertheless there are risks that cannot be... -
Page 11: Safety Stickers
It is strictly forbidden to remove the Safety Labels and the Identification Plate (Serial Number) applied to the Machine and/or its parts SWP Ltd. will not be held liable for safety aspects in relation to the Machine if this warning is not observed. -
Page 12: Technical Data
SWP Ltd. disclaims any responsibility for damage to the machine itself, to persons or property caused by the incorrect use of the collection hood or the use of inappropriate hoods. -
Page 13: Delivery Transport And Installation
In the event that the product is damaged, do not proceed with its implementation and report the incident to SWP Ltd. to agree with the same the actions to be carried out. -
Page 14: General Rules Of Use
This machine must only be used for the use for which it was expressly designed. Any other use is to be considered improper and therefore dangerous. SWP Ltd. cannot be held responsible for any damage deriving from improper, erroneous and unreasonable use. -
Page 15: Maintenance
Cobra Stealth Fume Portable 5. MAINTENANCE ORDINARY MAINTENANCE The machine requires the ordinary maintenance operations listed below, to be performed periodically by the personnel defined in the right column: Intervention Staff Frequency Visual check of the condition of the flexible hoses. Annual Check the correct tightening of the hose clamps. -
Page 16: Replacing The Cartridge Filter
Cobra Stealth Fume Portable 5.2.1 REPLACING THE CARTRIDGE FILTER The cartridge filter is located inside the carpentry of the machine on the side of the suction flange, fixed by means of a bayonet anchoring system. To replace it, follow the procedure below: •... -
Page 17: Replacement Of Protection Fuses
Cobra Stealth Fume Portable REPLACEMENT OF PROTECTION FUSES The COBRA STEALTH machine is powered by an electric socket which integrates a protection fuse which intervenes in the event of overloaded currents, safeguarding the suction brush motor and the machine itself. If, following an overcurrent, the fuse blows, it must be replaced. -
Page 18: End Of Use
Cobra Stealth Fume Portable 6. END OF USE PRELIMINARY OPERATIONS During the manufacturing process, the COBRA STEALTH machine accumulates dust and substances that can be potentially harmful to health. These substances, as well as the filters it mounts, must be removed before end of use of the machine and must be thrown away in accordance with the laws in force in the country where its demolition takes place. -
Page 19: Spare Parts
The user must order spare parts for his machine by contacting our local authorised Dealer. In case of need, contact our Technical Assistance Service. Use only original spare parts. The use of non-original spare parts immediately invalidates the guarantee. SWP Ltd. declines all responsibility for damage to persons or property caused by the use of non-original spare parts. -
Page 20: Wiring Diagram
Cobra Stealth Fume Portable 8. WIRING DIAGRAM COBRA STEALTH The COBRA STEALTH machine is equipped with an electric power socket with ignition switch, power light and protection fuses. By acting on the switch, it directly powers the electric motor, starting the suction operations. At the same time the red LED lights up to indicate that the machine is powered and switched on. -
Page 21: Problems, Causes And Solutions
Cobra Stealth Fume Portable 9. PROBLEMS, CAUSES AND SOLUTIONS PROBLEMS CAUSES SOLUTIONS STAFF Check the condition of the Blown fuse fuse with a tester Check the voltage of the electrical Too low voltage distribution network with a tester Failure to start the machine Problems with the Check and replace the... - Page 22 Cobra Stealth Fume Portable NOTES T: 01942 719930 I E: sales@specialisedwelding.co.uk I W:www.specialisedwelding.co.uk...
- Page 23 Cobra Stealth Fume Portable NOTES T: 01942 719930 I E: sales@specialisedwelding.co.uk I W:www.specialisedwelding.co.uk...
- Page 24 Sales & Distribution Centre Customer Service Unit 1, Withins Point, Withins Road, Haydock Industrial Centre, Haydock, WA11 9UD, UK T +44 (0) 1420 588180 I E sales@specialisedwelding.co.uk I W www.specialisedwelding.co.uk Social Media - Find us on Facebook, Instagram and LinkedIn - just search Specialised Welding Products Ltd...
Need help?
Do you have a question about the COBRA STEALTH PORTABLE and is the answer not in the manual?
Questions and answers