Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Moxa Technologies INJ-24 Series
- Page 1 RSP Supply Inc. | https://www.rspsupply.com Moxa PoE Injector INJ-24 Series Hardware Installation Guide Second Edition, March 2011 2011 Moxa Inc. All rights reserved. P/N: 1802000240011 RSPSupply - 1-888-532-2706 - www.RSPSupply.com http://www.RSPSupply.com/p-9580-Moxa-INJ-24-T.aspx...
-
Page 2: Wiring Requirements
RSP Supply Inc. | https://www.rspsupply.com Overview The Moxa PoE Injector INJ-24 Series is a 1-port PoE injector that delivers both data and electrical power to Ethernet-enabled devices using a single Ethernet cable. The INJ-24 can supply up to 30 watts of power through the Ethernet port, and can power IEEE 802.3af/at compliant... -
Page 3: Package Checklist
It is strongly advised that you label wiring to all devices in the system when necessary. Package Checklist The Moxa INJ-24 Series is shipped with the following items. If any of these items is missing or damaged, contact a Moxa customer service representative for assistance. -
Page 4: Panel Layout
RSP Supply Inc. | https://www.rspsupply.com Panel Layout 1. Heat dissipation orifices 2. Terminal block for power input and grounding 3. Moxa Logo 4. Power LED 5. Data input port 6. PoE LED 7. PoE output port 8. DIN-Rail - 4 - RSPSupply - 1-888-532-2706 - www.RSPSupply.com http://www.RSPSupply.com/p-9580-Moxa-INJ-24-T.aspx... - Page 5 RSP Supply Inc. | https://www.rspsupply.com Mounting Dimensions (unit = mm) - 5 - RSPSupply - 1-888-532-2706 - www.RSPSupply.com http://www.RSPSupply.com/p-9580-Moxa-INJ-24-T.aspx...
-
Page 6: Din-Rail Mounting
RSP Supply Inc. | https://www.rspsupply.com DIN-Rail Mounting The plastic DIN-Rail attachment plate should already be fixed to the back panel of INJ-24 when you take it out of the box. If you need to reattach the DIN-Rail attachment plate, make sure the stiff metal spring is situated towards the top, as shown in the figures below. -
Page 7: Led Indicators
RSP Supply Inc. | https://www.rspsupply.com Wiring the INJ-24’s Power Outputs The two left-most contacts of the 3-contact terminal block connector on the INJ-24’s top panel are used for 24 VDC output. Top and front views of one of the terminal block connectors are shown here. STEP 1: Insert the negative/positive DC wires into the V-/V+ terminals. - Page 8 RSP Supply Inc. | https://www.rspsupply.com Environmental Limits Operating Temperature Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) Storage Temperature -40 to 85°C (-40 to 185°F) Ambient Relative 5 to 95% (non-condensing) Humidity Regulatory Approvals FCC Part 15, CISPR (EN55022) class A...
Need help?
Do you have a question about the INJ-24 Series and is the answer not in the manual?
Questions and answers