Integrated Power CASAMBI CBU-ASD Manual

CBU-ASD
Bluetooth control unit for LED drivers
Warning!
Hazardous voltages. Risk of
electric shock or fire. Only qualified
professionals should make the
!
connections. Disconnect the
mains power supply and verify
its absence prior to installation.
Dimensions
56,5
49,5
42,4
35,8
6
Dimensions are in mm.
Description
CBU-ASD is a wireless control unit for any type of drivers with
0-10V, 1-10V or DALI dimming interface. CBU-ASD is available
with either analog 0-10V (and 1-10V) or digital Standalone DALI
control interface.
With Standalone DALI output, CBU-ASD acts both as a controller
and as a power supply making it possible to connect directly to
an LED driver with DALI interface without the need for an external
DALI power supply. This so-called standalone DALI makes
it possible to implement multi-channel lighting systems with
adjustable color (RGB and RGBW) or color temperature (CCT),
while keeping the wiring and number of components at their
minimum.
CBU-ASD does not comply with IEC 60929 and therefore is
not designed to be connected to an existing DALI network. The
module can be used only in a closed system, i.e. as a part of
a lighting system which is not connected to an external DALI
network.
CBU-ASD is controlled wirelessly with Casambi smartphone and
tablet applications using Bluetooth 4.0 protocol. The Casambi
app can be downloaded free of charge from Apple App Store
and Google Play Store.
Devices form automatically a secure wireless mesh network so
that a large number of luminaires can be controlled from any
point. No external gateway module is needed. CBU-ASD can be
controlled also from standard on/off wall switches.
Mounting hole diameter:
2 x 3,5 mm
22
Antenna location
* Tc point is on bottom side
casambi.com
EN
22,3