Advertisement

RRI-2206/28
Manual
EN
www.rami-yokota.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RRI-2206/28 and is the answer not in the manual?

Questions and answers

Summary of Contents for RED ROOSTER RRI-2206/28

  • Page 1 RRI-2206/28 Manual www.rami-yokota.com...
  • Page 4: Before Taking Into Use

    Please fill some droplets of resin and acid free oil into the air inlet and let the tool run free for a couple of seconds. (E.g. Red Rooster air tool oil: Order no. Atlub) Before connecting the hose to the tool please check, whether the hose and the quick coupler are clean. Do this by letting air run freely through hose and quick coupler, It is absolutely necessary, that quick coupler and hose have a sufficient diameter.
  • Page 5 The quality of the compressed air must be good, which means clean, dry and this is best assured by means of an air filter. We advise the use of a complete FRL (filter, regulator, lubricator) unit. The oiler has to be adjusted to approx. 3 to 6 droplets per minute.
  • Page 6 Keep away from whipping hoses, this can cause injuries. A broken air hose or a hose that comes loose of the hose joint can start whipping. Shut down the air supply immediately. In case the air hose is damaged, stop working, shut down the air supply and replace the hose.
  • Page 7: Using The Tool

    Make the possible countermeasures to minimize noise emission: if possible, use silence materials on the workpiece or walls around the work station. A risk assessment related to the noise emission at the work station on the work piece has to be made to determine the correct ear protection according to health and safety regulation.
  • Page 8: Maintenance

    Warranty covers material or construction mistakes of the manufacturer, which are clearly definable. Replacement of parts or repair by an official Yokota/Red Rooster service workshop is free of charge, when the tool is covered by warranty. Freight or postage is for the account of the buyer. Damage attributable to a normal wear, overloading or incorrect use is excluded from warranty.
  • Page 9 Repairs under warranty can only be considered, when the tool is in its original state and it is accompanied by a copy of the purchase invoice. Warranty claims have to be made through the dealer, who has supplied the tool concerned.
  • Page 10: Declaration Of Conformity

    Brand: RedRoosterIndustrial Product: Drills and tappers Type: RRI-2206/28 Capacity: 0,5 - 6,5 WE, RAMI YOKOTA B.V., hereby declare that this product is conform the European Directive 2006/42/EG and, the standard EN ISO 11148-3 Technical file available from Rami Yokota BV:...
  • Page 11 www.rami-yokota.com...

Table of Contents