Page 4
Please fill some droplets of resin and acid free oil into the air inlet and let the tool run free for a couple of seconds. (E.g. Red Rooster air tool oil: Order no. Atlub) Before connecting the hose to the tool please check, whether the hose and the quick coupler are clean. Do this by letting air run freely through hose and quick coupler, It is absolutely necessary, that quick coupler and hose have a sufficient diameter.
Page 5
In those cases, where it is possible, use of a centralized oiler is recommended by us. This system will allow use of less oil and assure a perfect lubrication. When using a centralized oiler, oil consumption can be reduced by up to 80%. If you intend not to use the tool for a longer period of time, it has to be oiled.
Page 6
This tool is not intended for use in potential expolosive hazardous areas and is not insulated from coming into contact with electric power. In case that during the use of this tool dust is generated by either the process or the exhaust air blowing on dust in the environment, a risk assessment has to made.
Page 7
If used otherwise a risk assessment has to be made by the employer/user. Warranty The warranty period from the date of purchase is as follows: • 12 months on Yokota , Toku and Red Rooster tools; • 3 months on spare parts of tools, which are repaired by us.
Page 8
Warranty covers material or construction mistakes of the manufacturer, which are clearly definable. Replacement of parts or repair by an official Yokota/Red Rooster service workshop is free of charge, when the tool is covered by warranty. Freight or postage is for the account of the buyer. Damage attributable to a normal wear, overloading or incorrect use is excluded from warranty.
Need help?
Do you have a question about the RRI-300770 and is the answer not in the manual?
Questions and answers