Download Print this page

Tape King TX100 / TX300 Manual

Also See for TX100:

Table of Contents

Overview

Overview

Enjoy our hassle-free, no questions asked, one-year warranty! Need help? Please contact us support@tapeking.com

Insert the roll of tape into tape roll holder (H). Make sure the sticky adhesive side is facing down before peeling off the tab.
Remove the blue plastic blade cover (B). Take caution while removing to avoid cutting yourself on the sharp blade. Use your fingers or a small tool to pry it off if stuck.
Pull the tape out using the starting guide tab arrows. Align the tape between black roller (C) and metal clasp (D). Make sure the sticky side is facing down. Pull the tape out and use blade to make the first cut before taping boxes.
Adjust the blue knob (G) clockwise to tighten brake tension or counter clockwise to loosen. We recommend turning it clockwise a few times but do NOT overtighten. Adjust to your liking. This controls the roller speed while dispensing tape.
Begin taping your box with 2-3" of tape to seal the seam and pull the tape gun, rolling it towards your body.
TIP: Use the clear swiper (A) and tilt forward while cutting the tape off. Don't use too much force or it may break. Use swiper (A) after taping, press down on the tape in a swiping motion to create a better seal.