Beper 40.931 Manual

Product description

Fig. A

1. Top cover
2. Liquid soap insertion hole
3. ON/OFF and distribution adjustment button
4. Liquid soap nozzle
5. Dispenser body
6. Operating light
7. Battery compartment
8. Support base

Fastening procedure

Fig. B

Instructions for Use

Insert the batteries into the battery compartment as described in the section "Battery installation".
Unscrew the top cover and insert the liquid soap being careful not to fill more than 3/4. It is important that the soap does not contain lumps or solid parts.
Press the ON/OFF button for a few seconds until the power light turns red.
Put your hands under the soap nozzle, the light will start to flash and the soap will start to drop, in the selected quantity (see "adjusting the distribution quantity").
During normal operation, press the ON/OFF button for a few seconds until the light turns off, and the sensor is turned off.
It is not necessary to turn off the product every time. Steady red light indicates that the product is operating.

Adjusting distribution quantity

This article has three different distribution settings, you can set it according to your needs. With the product on, press the ON/OFF button if the operating light flashes twice, it means that the minimum distribution is set. Press the ON/OFF button again and when the light flashes three times, it means that the average distribution has been set, press the button again, the light flashes four times, this means that the maximum distribution has been selected. If you press the button again, the light will flash twice, this means that you return to the minimum distribution setting.

Battery installation

Remove the support base.
Open the battery compartment and insert the batteries.
Insert 4 "AAA" type batteries and make sure to respect the polarity (+/-).
Never mix batteries that have different characteristics or of different types.

Attention: replace all batteries at the same time.

Close the battery compartment and place back the support base.
If you do not intend to use the appliance for a long period, please remove all the batteries from the battery compartment.

Cleaning and maintenance

Do not wash the product under running water but clean with a slightly damp soft cloth.
Do not allow water or other liquids to enter the battery compartment.

Technical data

Operates with 4 AAA batteries (not included)

General safety advice

Read the operating instructions carefully before first use of the appliance.
Read the following instructions carefully, since they give you useful safety information about installation, use and maintenance and help you avoid mishaps and possible accidents.
Remove the packing and make sure that the appliance is intact, with special attention to the supply cable. The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from danger sources.
It is recommended not to throw these packing material in the domestic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information to the manager of the sanitation department of your own municipality.
This appliance is to be destined to its special purpose only.
Any other use is to be considered as improper and thus dangerous. The manufacturer cannot be responsible for any damages deriving from improper, wrong or incautious use.
To protect against electric shock, do not immerse any parts of the appliance into water or other fluids.
Do not expose the appliance to atmospheric agents such as rain, wind, snow, hail.
Do not use the appliance near explosives, highly flammable materials, gases, burning flames, heaters.
Do not allow children, disabled people or every people without experience or technical ability to use the appliance if they are not properly watched over. Close supervision is necessary when any appliance used by or near children.

Make sure that children do not play with this appliance.
If you decide not to use the appliance any longer, make it unserviceable.
Also make any dangerous parts unserviceable, especially for children who could play with the appliance.

Safety instructions

Please read these instructions carefully when using the appliance, to avoid damage caused by improper use.
Keep these instructions as they can be used in future situations. If the appliance is transferred to a third party, please include these instructions with the unit.
Do not attempt to open the container under any circumstances and do not attempt to repair the appliance by yourself, please consult a specialist.

GUARANTEE CONDITIONS

Contact your distributor in your country or after sales department beper.
E-mail assistenza@beper.com which will forward your enquiries to your distributor.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Beper 40.931 Manual