Advertisement
Quick Links
Advertisement
Related Manuals for AEG LSR6E27DC
Summary of Contents for AEG LSR6E27DC
- Page 1 EN User Manual | Washing Machine LSR6E27DC aeg.com\register...
-
Page 2: Table Of Contents
Welcome to AEG! Thank you for choosing our appliance. Get usage advice, brochures, trouble shooter, service and repair information: www.aeg.com/support Subject to change without notice. CONTENTS 1. SAFETY INFORMATION................2 2. SAFETY INSTRUCTIONS................4 3. PRODUCT DESCRIPTION................6 4. TECHNICAL DATA..................7 5. -
Page 3: General Safety
the use of the appliance in a safe way and understand the hazards involved. • Children between 3 and 8 years of age and persons with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised. •... -
Page 4: Safety Instructions
• The ventilation opening in the base must not be covered by a carpet, mat, or any floor covering. • The appliance must be connected to the water mains using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre. -
Page 5: Water Connection
2.4 Use • Always use a correctly installed shockproof socket. • Make sure that the parameters on the WARNING! rating plate are compatible with the Risk of injury, electric shock, fire, burns electrical ratings of the mains power or damage to the appliance. supply. -
Page 6: Product Description
2.6 Disposal • Remove the door catch to prevent children or pets from becoming trapped in the drum. WARNING! • Dispose of the appliance in accordance Risk of injury or suffocation. with local requirements for the disposal of Waste Electrical and Electronic Equipment •... -
Page 7: Technical Data
The rating plate reports the model name (A) , product number (B), electrical ratings (C) and serial number (D). Mod. xxxxxxxxx Prod.No. 910000000 00 000V ~ 00Hz 0000 W 00000000 4. TECHNICAL DATA Dimension Width/ Height/ Total depth 59.5 cm / 84.3 cm / 48.7 cm Electrical connection Voltage 230 V... - Page 8 3. Open the door. Remove all the items from and the drain hose from the hose holder. the drum. 4. Put the front polystyrene packaging element on the floor behind the appliance. Carefully put down the WARNING! appliance onto its rear side. It is possible to see water flowing from the drain hose.
-
Page 9: Positioning And Levelling
5.2 Positioning and levelling Adjust the appliance correctly to prevent vibration, noise and movement of the appliance when it operates. 1. Install the appliance on a flat hard floor. already installed at the factory. The appliance must be levelled and stable. -
Page 10: Water Drainage
2. On the edge of a sink - Fasten the guide to the water tap or to the wall. 3/4” 3/4” WARNING! Make sure that the plastic guide The inlet water shall not exceed 25 °C. cannot move when the appliance drains and the drain hose end is not CAUTION! immersed in the water. -
Page 11: Accessories
6.2 Fixing plate kit or from authorised dealer If you install the appliance on a plinth that is not an accessory supplied by AEG, secure Read carefully the instructions supplied with the appliance with the fixing plates. This the accessory. -
Page 12: Control Panel
7. CONTROL PANEL 7.1 Control panel description 11 10 Programme dial • Předpírka option Display Hygiene button (Hygiena ) Odložený start touch button Jemné+ touch button Úspora času touch button Odstřeďování touch button • Skipping phases - Pouze vypouštění Máchání touch button •... -
Page 13: Dial And Buttons
Maximum load indicator. The icon flashes during programme time estimation (refer to "PROSENSE load detection" paragraph). Delay start indicator. Door locked indicator. The digital indicator can show: • Programme duration (e. g. • Delay time (e. g. • Cycle end ( ). •... - Page 14 8.2 Introduction The appliance empties the water out automatically after 18 hours The options/functions are not selectable approximately. with all washing programmes. Check the • Activate the Extra Silent option. compatibility between options/functions The intermediate and the final spinning and washing programmes in the phases are suppressed and the "Programme Chart".
-
Page 15: Odložený Start
The appliance performs only the spinning 8.7 Odložený start phase of the selected washing With this option you can delay the start of a programme. programme in a more convenient time. The display shows the indicator Touch the button repeatedly to set the (cold), the phase indicator and the spin required delay. -
Page 16: Programmes
be changed. Option Úspora času Extra silent are not available. Tested for Staphylococcus aureus, Enterococcus faecium, Candida albicans, The corresponding indicator above the touch Pseudomonas aeruginosa and MS2 button illuminates. Bacteriophage in external test performed This option, thanks to washing phase by Swissatest Testmaterialien AG in combined with steam vapour , removes more 2021 (Test Report No. - Page 17 Programme Programme description Outdoor Do not use fabric softener and make sure that there is no softener residue in the detergent dispenser. Outdoor clothing, technical, sport fabrics, waterproof and breathable jackets, shell jackets with a removable fleece or inner insulation. The rec‐ ommended laundry load is 2.0 kg.
-
Page 18: Programme Options Compatibility
Programme Default tempera‐ Reference spin speed Maximum load ture Spin speed range Temperature range 40 °C 1200 rpm 1.5 kg Vlna/Hedvábí 40 °C - Cold 1200 rpm - 400 rpm 30 °C 1200 rpm 3.0 kg 40 °C - 30 °C 1200 rpm - 400 rpm 20 min. - Page 19 ■ ■ ■ ■ ■ ■ ■ ■ ■ Pouze odstřeďování ■ ■ ■ ■ Skvrny Předpírka ■ ■ ■ Extra máchání ■ ■ ■ ■ ■ ■ Pouze máchání ■ ■ ■ ■ ■ ■ ■ ■ ■ Hygiena ■...
-
Page 20: Settings
Programme Universal Liquid Univer‐ Liquid for col‐ Delicates Special oureds woollens powder 1) Outdoor ▲ ▲ Denim ▲ ▲ ▲ At temperature higher than 60 °C the use of powder detergent is recommended. ▲ = Recommended -- = Not recommended 9.2 Woolmark Wool Care - Blue The wool wash cycle of this machine has been approved by The Woolmark Company for the washing of wool garments la‐... -
Page 21: Permanent Extra Rinse
text Hr for 2 seconds, 12 (thousands and hundreds) for 2 seconds and 76 (tens and units). If you deactivate the acoustic signals, they continue operate when the appliance has a malfunction. If the procedure does not work (due to 10.4 Permanent Extra Rinse timeout, wrong programme dial position or wrong keys combination), switch the... -
Page 22: Daily Use
12. DAILY USE CAUTION! WARNING! Washing heavily oiled, greasy stains Refer to Safety chapters. could cause damage rubber parts of the appliance. 12.1 Activating the appliance 1. Connect the mains plug to the mains 12.3 Using detergent and additives socket. 1. -
Page 23: Setting A Programme
After a washing cycle, if necessary, remove any detergent residue from the detergent dispenser. 12.4 Changing position of detergent divider 1. Pull out the detergent dispenser. The position A of the detergent divider is for powder detergent (factory setting). • Do not use gelatinous or thick liquid detergents. -
Page 24: Starting A Programme With The Delay Start
indicators come on in the display and the Changing the delay start after the given information changes accordingly. countdown has started To change the delay start: In case a selection is not possible, no 1. Touch the Start/Pauza button to pause indicator comes on and an acoustic the appliance. -
Page 25: Programme Phase Indicators
2. Press the Zap./Vyp. button again to activate the appliance. • About 20 minutes after the Now, you can set a new washing programme. programme start, the programme duration could be adjusted again depending on the capacity of water If the ProSense phase is already carried absorption of the fabrics. -
Page 26: Stand-By Option
The door unlocks and the indicator goes • If you have set , the appliance only off. drains the water. The option indicator goes off, while 1. Press the Zap./Vyp. button to the indicator flashes and then goes off. deactivate the appliance. 3. -
Page 27: Stubborn Stains
• Follow the washing instructions on the laundry care labels. • Do not wash white and coloured items together. • Some coloured items can discolour with the first wash. We recommend that you wash them separately for the first couple of times. -
Page 28: Care And Cleaning
– the laundry is lightly soiled, laundry can then be washed at a lower – there is large amounts of foam during temperature. washing. • To use the correct quantity of detergent, • When using detergent tabs or pods, refer to the quantity suggested by the always put them inside the drum, not in detergent producer and check the water the detergent dispenser and follow the... -
Page 29: External Cleaning
14.3 External cleaning 14.6 Door seal Clean the appliance with mild soap and warm This appliance is designed with a self water only. Fully dry all the surfaces. cleaning draining system, allowing light fluff fibers that fall off the clothes to be drained out Do not use a scouring pads or any scratching with the water. -
Page 30: Cleaning The Drain Pump
1. Open the drawer. Press the catch of accumulated detergent. After cleaning, downwards as indicated in the picture replace the top part in its position. and pull it out. 4. Insert the detergent drawer into the guide 2. Remove the top part of the additive rails and close it. - Page 31 Always keep a rag nearby to dry up any water spillages when removing the filter. Proceed as follows to clean the pump: ENGLISH...
-
Page 32: Cleaning The Inlet Hose And The Valve Filter
WARNING! Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. Make sure also that you tighten the filter correctly to prevent leakages. When you drain the water with the emergency drain procedure, you must activate the drain system again: 1. -
Page 33: Frost Precautions
vertical position) depending on the 2. Start the programme to drain the water. position of your water tap. 14.12 Frost precautions If the appliance is installed in an area where the temperature can reach the values around 0° C or drop below, remove the remaining water from the inlet hose and the drain pump. - Page 34 • Make sure that the water tap is open. • Make sure that the pressure of the water supply is not too low. For this infor‐ The appliance does not fill mation, contact your local water authority. with water properly. •...
- Page 35 Problem Possible solution • Make sure that the couplings of the water hoses are tight and there is not wa‐ ter leakages. There is water on the floor. • Make sure that the water inlet hose and the drain hose have no damages. •...
-
Page 36: Consumption Values
16. CONSUMPTION VALUES 16.1 Comment The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance. -
Page 37: Quick Guide
Programme Litres hh:mm °C Bavlna 0.300 80.0 02:45 53.00 20.0 1200 20°C Syntetika 0.650 65.0 02:15 35.00 40.0 1200 40°C Jemné prádlo 0.400 50.0 01:10 35.00 30.0 1200 30°C Vlna/Hedvábí 0.250 50.0 01:10 30.00 30.0 1200 30°C Suitable for washing heavily soiled textiles. Suitable for washing lightly soiled cottons, synthetic and mixed fabrics. -
Page 38: Cleaning The Drain Pump Filter
17.2 Cleaning the drain pump filter Clean the filter regularly and, especially, if the alarm code appears on the display. 17.3 Programmes Programmes Load Product description Eco 40-60 7.0 kg White and coloured cottons. Normally soiled garments. 7.0 kg White cotton and coloured cotton. Bavlna 3.0 kg Synthetic items or mixed fabric items. - Page 40 155294280-A-122024...
Need help?
Do you have a question about the LSR6E27DC and is the answer not in the manual?
Questions and answers