UHPPOTE HBK-T02 Instructions

HBK-T02
Introduction
This product is versatile remote control that can be used in many fields, such as access control
system, wireless remote control of the lamps and other 433MHz external receivers.
Remarks: This remote control can only be compatible with the receivers sold in our store. If you
use other sellers' receiver, please consult us before using.
Specifications
Operating Voltage
Powered By
Modulation Type
Antenna Gain
Encoding Type
Enclosure Color
Enclosure
Material
Dimensions
Programming
The programming method of the transmitter depends on the receiver, please refer to the pairing
method of the receiver.
How to Replace the Battery
To replace the battery, open the back case with a screwdriver, then insert batteries with positive
(+) side up. Replace the batteries with 2pcs 3V CR2016 button batteries. Please dispose of the old
batteries properly.
Remote Control Transmitter
6VDC (Built-in
batteries)
2pcs 3V CR2016
batteries
ASK
3.6dBi
Fixed code
Black
Plastic
57.8L x 33.3W x 12.5H (mm) / 2-9/32" x 1-5/16" x 31/64"
Operating Current
Operating Frequency
Transmit Power
Number of Buttons
Emission Distance
Wireless Remote Control Chip
Button Material
3mA
433.92MHz
15mW
2
max. 50m (Open area)
EV1527
Silicone