Do you have a question about the USS-ZWC00001 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for U.S. Solid USS-ZWC00001
Page 1
This manual shall be made available to all users of this water cooler. To ensure the best results and maximum durability of this U.S. SOLID LLC (hereafter U.S. SOLID) product, read and follow all instructions carefully. All safety suggestions must be followed closely and precautions must be taken to guarantee this machine is only used by qualified personnel who have understood this guide.
Contents English User Manual I. Getting Started........................1 II. Safety Instructions......................2 III. Specifications........................4 IV. Packing List........................5 V. Installation........................5 VI. Structural Diagram......................6 VII. Troubleshooting......................8 Deutsches Handbuch I. Erste Schritte........................9 II. Sicherheitshinweise......................10 III. Spezifikationen.......................13 IV. Packliste.........................14 V. Installation........................14 VI. Strukturelles Diagramm....................15 VII. Fehlersuche........................17 For questions or concerns, email: service@ussolid.com...
Thank you for purchasing the U.S. SOLID water cooler. To ensure smooth and safe operations, please review this full manual. Changes in technology happen often and rapidly, which is why our team at U.S. SOLID reserves the right to modify the specifications and procedures for this water cooler immediately and without notice.
II. Safety Instructions This manual includes basic safety precautions and instructions for installation, operation, and maintenance. This machine should only be operated by adults who have read and fully understood this manual. Always make sure the machine is grounded. ...
Page 5
II. Safety Instructions Always ensure the water tank is filled at least to the minimum safety line. Always monitor the level of the cooling fluid. Add fluid before the level drops below the minimum level indicator. Pump may be permanently damaged when tank is empty! Always connect the machine to your welder before welding.
III. Specifications Model USS-ZWC00001 USS-ZWC00002 USS-ZWC00003 USS-ZWC00004 Current 2.2 A Voltage 110 V (single-phase) Cooling 2.8 kW 1.5 kW 1.7 kW 2.6 kW Capacity Power 370 W Max. Pressure 0.35 MPa Max. Head ~35 m (~115 ft) Water Tank 25 L (6.6 gal) 10 L (2.6 gal)
IV. Packing List No. Part Quantity Water Cooler Stainless Steel Hose Clamps Red Hose 1x (1.5 m (~5 ft) long, 10.5 cm (4.13 in) diameter) Blue Hose 1x (1.5 m (~5 ft) long 10.5 cm (4.13 in) diameter) V. Installation 1.
VI. Structural Diagram Description Description Cover Handle Radiator Tank Holder Bottom Panel Quick Connector Inlet Quick Connector(Red) Motor Body Outlet Quick Connector(Blue) Cable Box Fan Socket Power Cable Capacitor for Motor Hose Pump Head Inlet Connector Lid of Tank Main Switch Bottom Cover of Tank Outlet Connector Washer for Bottom Cover...
Page 9
VI. Structural Diagram For questions or concerns, email: service@ussolid.com...
VII. Troubleshooting Issue: Motor does not start. Possible Causes: a. Main voltage is too low. b. Start capacitor is defective. c. Motor is defective. d. Machine has not been used for a prolonged period. Solutions: a. Use the correct electric supply. b.
Page 11
For questions or concerns, email: service@ussolid.com...
Need help?
Do you have a question about the USS-ZWC00001 and is the answer not in the manual?
Questions and answers