Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Dormakaba BRC-H 3
- Page 1 Hand-Held Transmitter BRC-H 3 User manual WN 058837 45532/16089 – 2022-09...
-
Page 2: Table Of Contents
Contents For your safety Scope of delivery Recycling and disposal General information Inserting/changing the battery Programming receivers Operation Care and maintenance Duty cycle 10. Reset 11. Error messages 12. Technical information 13. EC Declaration of Conformity UKCA Declaration of Conformity “Original operating instructions”... -
Page 3: For Your Safety
For your safety This documentation contains important information regarding the mounting and the safe operation. Read the operating instructions carefully before us- ing your hand-held transmitter. Keep the operating instructions in a safe place so that you can consult them later! If you pass the device on, include the operating instructions for those who will be using it. -
Page 4: Scope Of Delivery
Scope of delivery • Hand-held transmitter • Keyring • LR03/AAA/micro battery • Operating instructions Recycling and disposal The hand-held transmitter and packag- ing consist mainly of parts made from recyclable raw materials and should not be disposed of with the household waste. Ensure that the used machine is disposed of properly. -
Page 5: General Information
General information The hand-held transmitter can be used to control devices that are equipped with an appropriate receiver. Each of the 4 buttons can be connected to one or more receivers. This means that multiple actions can be carried out by pressing one button. Controls 1 –... -
Page 6: Inserting/Changing The Battery
Inserting/changing the battery If the LED turns red and flashes rapidly 5 times when a button is pressed, the battery must be replaced. Only LR03/AAA/micro batteries may be used. Do not charge or open batteries or throw them on a fire. Do not short-circuit batteries! Risk of explosion! Push cover away from device with a little pressure and open... -
Page 7: Programming Receivers
Programming receivers The program button is recessed in the housing. Press with a pointed object to actuate it. Maintain a distance of at least 50 cm between the devices when programming. Procedure Press and hold the program button on the receiver for at least 4 seconds. -
Page 8: Operation
By repeating steps 1–3, other receivers can be pro- grammed for the same operating button and other transmitters programmed for one receiver. Operation Pressing a button triggers an opening signal in the connected devices. During wireless transmission, the LED is amber. The duration of transmission depends on the num- ber of receivers being activated and the number of transmission attempts required. -
Page 9: Duty Cycle
Duty cycle The duty cycle is the term used for a legal regula- tion that limits the transmission time of devices in the 868 MHz range. The objective of this regulation is to ensure that all devices working in the 868 MHz range can function. - Page 10 Hand-held transmitter Press and hold the program button for more than 5 seconds. ► The LED turns red and flashes slowly. Press and hold the program button for more than 5 seconds. ► The red LED starts to flash more quickly. ►...
-
Page 11: Error Messages
11. Error messages LED flashing code Meaning 1x long, 2x short, The battery power is too pause, low, the battery must be 1x long, 2x short replaced (see Section 5). On pressing a button, No receiver has yet been the LED turns amber programmed for this and flashes for 1 button. -
Page 12: Technical Information
12. Technical information Wireless frequency 868.3 MHz Average free-field 100 m range Power supply 1 x 1.5 V LR03/micro/AAA Battery approx. 5 years with life 10 actuations per day Protection class IP20 Housing Dimensions 38 mm x 75 mm x 14 mm (WxHxD) Weight 26 g... -
Page 13: Eg Declaration Of Conformity
Deutschland GmbH DORMA Platz 1 58256 Ennepetal hereby declares that the product Handsender BRC-H 3 complies with the provisions of the EC Directive(s) specified in the Appendix and that the standards and/or technical specifications referred to in the Appendix were applied. -
Page 14: Ukca Declaration Of Conformity
The undersigned representing the following manufacturer dormakaba Deutschland GmbH DORMA Platz 1 58256 Ennepetal, Gemany declares that the product Handsender BRC-H 3 complies with the provisions of the applicable UK legislation and UK designated standards. UK Legislation: • Radio Equipment Regulations 2017 •... - Page 16 Deutschland GmbH DORMA Platz 1 58256 Ennepetal Deutschland T: +49 2333 793-0 F: +49 2333 793-4950 www.dormakaba.com...
Need help?
Do you have a question about the BRC-H 3 and is the answer not in the manual?
Questions and answers