Advertisement
Advertisement
Table of Contents
Related Manuals for IWCS iriBridge
Summary of Contents for IWCS iriBridge
- Page 1 User manual iriBridge IWCS iriBridge & iriBridge-R V. 01/25FA...
- Page 2 IRIDIUM WATERPROOF COMMUNICATION SYSTEMS iriBridge & iriBridge-R iriBridge IWCS IWCS HOPE YOU WILL ENJOY THE BENEFITS OF TROUBLE FREE HIGH QUALITY INTERCOM. PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE FIRST USE. IF INSTALLED, OPERATED AND MAINTAINED ACCORDING TO THIS MANUAL THE iriBridge WILL BE A RELIABLE PARTNER FOR MANY YEARS TO COME.
-
Page 3: Table Of Contents
2.2 Tools Page: 2.3 Installation Page: 3. Operation 3.1 Main Description Page: 3.2 Setting Up Page: 3.3 Wiring Page: 3.4 Pairings Page: 4. Service And Maintenance 4.1 Troubleshoot Page: 4.2 Technical Specifications Page: Hejrevang 13 +45 43 43 26 26 3450 Allerød info@iwcs.eu Denmark www.iwcs.eu V. 01/25FA... -
Page 4: Introduction
Introduction 1.1 Disclaimer Any responsibility or liability for loss or damage in connection with the use of this product and the accompanying documentation is disclaimed by IWCS. The information in this manual is provided for information purposes only, is subject to change without notice and may contain errors or inaccuracies. Manuals issued by IWCS are periodically revised and updated. Anyone relying on this information should acquire the most current version e.g. upon request at info@iwcs.eu IWCS is not responsible for the content or accuracy of any translations or reproductions, in the whole or in part, of this manual from any other source. 1.2 Copyright 2025 Iridium Waterproof Communication Systems ApS. All right reserved. Printed in Denmark. 1.3 Trademark iriBridge is a Trademark by Iridium Waterproof Communication Systems ApS. Revision Release date Release note 19-03-2024 General Revisit 16-01-2025 General Revisit / New Design... -
Page 5: Safety Warning Page
In case of suspected smoke in the lungs, a doctor should be consulted • POWER LOSS Power interruptions limited to IriBridge will not affect other users communication. A general power outage will turn off the entire intercom system. IWCS is not responsible for any power outages or consequences thereof, of any kind. • WARRANTY LIMITATIONS IMPORTANT - This unit is a sealed waterproof unit (classified IP67). To create and maintain its waterproof integrity it has been assembled in a controlled environment using special equipment. This unit is NOT a user serviceable unit, and under no... - Page 6 Unboxing 2.1 In The Box 1 x iriBridge 1 x Magnet iriBridge IWCS 1 x User Manual Hejrevang 13 +45 43 43 26 26 3450 Allerød info@iwcs.eu Denmark www.iwcs.eu V. 01/25FA...
-
Page 7: Installation
• 4x washers. • Drill 4.5 mm holes. 3.3 Installation Find a flat surface for mounting your iriBridge. Make sure that the antennas are not positioned close to reflecting metal surfaces (e.g. aluminum, steel, carbon fiber). Drill 4 x holes (4,5 mm or 3,2 mm depending on type of screw). Mount the selected screws. If mounted in a very bumpy/shaky location, mount iriBridge on shock mounts (available from IWCS or your local dealer). Seal the holes with non-toxic industrial silicone. Hejrevang 13 +45 43 43 26 26 3450 Allerød info@iwcs.eu Denmark www.iwcs.eu V. 01/25FA... -
Page 8: Main Description Page
Dual Digital Accesspoint: iriBridge is the digital Audio link between two wireless headsets, like iriComm headsets or 3rd party headsets/earpieces. 3.2 Setting Up iriBridge / iriBridge-R: Connect the power cables to a suitable 12 VDC outlet. iriBridge turns on automatically and after a few seconds both indicator LEDs will be flashing green. iriBridge-R only: Connect the radio cable to the radio. The connector type depends on the ordered iriBridge. Connect the PTT cable. 3.3 Wiring iriBridge-R iriBridge iriBridge iriBridge IWCS... - Page 9 3.4 Pairings Pairing (of two headsets): Before you can use your iriBridge, you must setup pairing with two suitable Bluetooth headsets - one at a time. Preferably, the headset(s) should allow local volume control as iriBridge does not perform any volume control. iriBridge IWCS Pairing 1: Put your headset into Bluetooth pairing (by flowing the instructions for the chosen headset). Place the blue magnet in front of the (*) mark for channel 1. The LED indicator will change from a flashing green to a steady blue light. Remove the magnet as soon as the indicator LED changes to green. The LED indicator will now be fast-flashing blue indicating that iriBridge is in pairing mode.
- Page 10 Advanced Set-up: iriBridge also has the feature of acting as a wireless link between e.g. two vessels each equipped with an iriBridge. In this case, channel 2 on each iriBridge is used for connecting to the other iriBridge. iriBridge iriBridge IWCS IWCS Pairing with another iriBridge: Place the blue magnet in front of the mark for channel 2 on the first iriBridge. The LED indicator will change from a flashing green to a steady blue light. Remove the magnet as soon as the indicator LED changes to green. The LED indicator will now be fast-flashing blue indicating that iriBridge is in pairing mode. On the second iriBridge, place the blue magnet in front of the mark for channel 2. The LED indicator will change from a flashing green to a steady blue light. Wait for the LED to change from steady blue to steady green and then back to steady blue again. Remove the magnet as soon as the indicator LED changes to blue.
- Page 11 IWCS Indicates Power ON Place and hold the magnet until steady blue light turns green - remove immidiately Indicates that Channel 1 is in pairing mode Connection established FOLLOW THE SAME STEPS ON CHANNEL 2 Hejrevang 13 +45 43 43 26 26 3450 Allerød info@iwcs.eu Denmark www.iwcs.eu V. 01/25FA...
-
Page 12: Service And Maintenance
4.1 Troubleshoot Action Problem Cause No light in LED Indicators Power cable not plugged in, Replace iriBridge Cable defective, iriBridge is defect RED light indication Other failure Restart the system No Audio Paired device too far away, Move paired device closer, iriBridge defect Replace iriBridge For other troubles - contact your local dealer support. -
Page 13: Technical Specifications
4.2 Technical Specifications iriBridge iriBridge iriBridge R Weight 600 g 800 g Wireless 2,4 GHz 2,4 GHz Waterproof IP67 IP67 Temperature range -30 to +60 °C -30 to +60 °C Power 12 VDC 12 VDC Antenna connector Wireless range >100 m LOS >100 m LOS... - Page 14 Hejrevang 13 +45 43 43 26 26 3450 Allerød info@iwcs.eu Denmark www.iwcs.eu V. 01/25FA...
- Page 15 Hejrevang 13 +45 43 43 26 26 3450 Allerød info@iwcs.eu Denmark www.iwcs.eu V. 01/25FA...
- Page 16 IWCS Aps Hejrevang 13 3450 Allerød Denmark +45 4343 2626 info@iwcs.eu www.iwcs.eu...
Need help?
Do you have a question about the iriBridge and is the answer not in the manual?
Questions and answers